Length of speaker cables

Morrow is the best I've seen. Very good prices, usually there is a sale, or a 40% discount if you upgrade from any cable. They have a very long break-in period so be prepared.

I had mono blocks & went to used Anthoney Gallo 3.1 Speakers with 8 foot high end Silver Plated O2 Free Twisted 12 Gauge Copper Cables (Cables came with the speakers).   I was underwhelmed with the highs, especially Cymbal Sheen.

Later, I built 3 foot long, 5 Strand Pure Silver, (Just under 12 Gauge Total) Teflon coated Speaker Wires & connected them directly to the Mono Blocks.

WOW did the highs ever Jump out & Cymbals had that Sheen, just as in real life.

I do not know if it was the Length or Silver, but the combination was spectacular!. 

Cut in half and biwire.

Have QS mono block 60 watt tube amps with 97.5 dB efficient Speakers tried combination of long IC & short SC & different brands of cables the best I found were boutique cables Zenwave alloy( gold & Silver etc)  & Wywire , I ended up with Wywire all copper Both IC 2 meter 3 meter Speaker cables ( although tried Mogami 1meter self terminated cables ) I don’t like cables that seem to be used as tone control that is what I found with Silver ( bright) or silver gold alloy . The Wywire are very neutral you hardly know they are their in your system
 

+1 for volumizer...

Why change your cables? With the length you have, you could cut those down probably to where you could use a whole cable per binding post - twisting the amp ends together may be a challenge, but I would use as much of your existing cable cut down to short little bundles as possible. Whatever you could fit in the spade to crimp. You won’t regret that and would make your Rocket sound like some of the bigger AQ models, and better.
There will not only be a difference going shorter, but an improvement!