seeking ‘HORN’ ideas apart from Klipshc Lascalla


hello all!

Horns, and just now, the Klipsch Lascalla interests me and as a new purchased items, ala, $12K MSRP, are doable.

to gain a wider perspective what other avenues, choices, or options in competing brands could be suggested as alternative selections in the $8K to $15K new or used arena?

i’m aware adding sub (s) is a likely necessity with the Lascallas, and possibly many other such speakers..

power is up in the air and nothing yet is set to stone, but any speaker candidates will be used with tube or SS amps. Tubes predominately of course. albeit, not necessarily SET Flea wattage amps, e.g., 2a3, 300B, etc., though I’d not wish to rule out these types as a later down the road application .

I’ve heard only at shows sevewral brands and have not been thrilled by Avante gard Duos or uno’s especialy.

I have enjoyed immensely the Classic audio T1s but am having issues justifying their near $40K entry fee.

overall, i do enjoy the idea of the sheer impact and presence horns produce but feel from my brief listening experiences in show venues imaging often lacked yet contributed this attribute to room conditions and or the LP itself being perhaps too close.

truth be told, even cone speakers are not totally off the table as considerations, as some ‘hybrid’ bass powered systems appear to be quite easily driven;.

predominately, my main caveats here are size of units and the room dims. they will be set.

for a bit , room size will be 13.5ft x 21ft x 8.5ft and using the short wall.

albeit the current room dims will increase, it is not yet known to what extent, though the desire is to land in a larger, but not huge dedicated listening room. likely a tad wider one in any event

secondly, given present room dims, it seems to me placing speakers in there which are taller than about 4ft or so, is going to be excessive…. ?

lastly, imaging is usually a pet peve of mine. the better the imaging the more involved the presentation seems to be IMO. certainly imaging is not the whole shooting match and orgainics, speed, leading edge def, decay, lower register deliniation, and presence all play quite significant roles.

as I’m at the onset of putting together this outfit any suggestions are definitely appreciated in terms of speaker ideas other than the Lascalla per se.

alas, DIY, or kit options are off the table as assenbly is no longer something I’m comfortable doing..

as for power, consider what ever amps are involved, I’d probagbly use what ever quality amps whose outputs are 25wpc or greater, be it one chassis or two. the plan is to acquire more than one sort of power amp in topology and or output along the way.

huge thanks, .
blindjim
@blindjim  Didn't I meet you this last February in our room at the Tampa audio show? We were playing the Classic Audio Loudspeakers, one of two models- the Hartsfield reproduction, which is 16 ohms and about 105dB, or the T-1 which is 16 ohms but goes down to 20Hz. Seems to me we had a brief conversation after your listening session there. I hope you are well!
@allears4u. All good ! The bass quality on the Lascala is superb. But, " for me ", they need that last bit of bottom, and it depends on the music listened to. I run mine full range ( many tweaks and mods ), and run my subs starting at just below 50 hz, with as fine adjustment as possible, and to me, it is a smooth transition, which again, is quite coherent. John K...I have no doubts about what you say, but I have seen and heard many DIY horns ( likely not yours ) that are just too big...not in size, although large, but, in presentation. 
Just my two cents. I purchased khorns in 1982. They got tiring. I read about Volti Audio klipschorn upgrades. Had doubts. Called a fellow named Dan Kapeller in Cheyenne Wyoming. He said he was going to dispose of his khorns until he installed the upgrades. I ordered the upgrades, installed them, and OHMIGOD! Over the moon! Nirvana. Are now Volti horns. Made of wood. Just like original 1947 khorns. Best bet is to find a set of khorns gutted out for little as possible. Expensive enough. Update is $4700 with you installing. Would pit them against ANYTHING! Run with 10 watt set amps. If interested, send email to bjprice33@hotmail.com. Can start there. William
Klipsch products IMO are way overpriced but I figure you are paying for nice furniture, you know, to go next to the Harley in the studio ;-)

Crites is a superior alternative. Does anyone know if these have 4 posts for biamping?

Superstoke, are you still enjoying yours?