I have been introduced to a new type of power conditioner, the first of it’s type I saw was from Germany. However the second one, introduced to me by an Agon member is the one I purchased, is from England.
The one I purchased has two transformers in parallel to support the current load, and it has protection from power spikes, nothing too different here.
Then it has capacitors in the circuit that effectively remove DC from the AC.
Individual for each outlet.
Then there is in the shunt to ground off the AC sine wave. This filter has individual inductors on each outlet that are a high pass filter then in parallel with both the active and another for the neutral short energy back to ground.
What does that mean? Frequencies interpolated in the AC sine wave that are riding on the alternating current are shorted to the ground wire back to the box. The path of least resistance isn’t into your bridge rectifier, stiffening caps, linear regulator, it’s back to ground.
There’s no current limiting, the current carrying conductors are still only added to in parallel, and this draws away the nasty hash from the alternating current.
Others have also commented on the incredible difference it has made.
Being USD$2400 it was cheaper than the German made device, with individual filtering for each output device, so no chance of noisy devices affecting another.
Thank you Agon, for the free advice and the best conditioner I have heard or used.
I have a Datasat RA-2400 that’s a two by 400watts @ 8Ohm amplifier, my TV (I use it as a monitor), HDPlex 200W linear power supply (for my fanless PC server), DAC and the MCP thing for my Synergistic Research Master Coupler X2 20A power cord feeding it - all running through the device. It performs perfectly, and the system is cleaner with no loss of power that I can hear.
