Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure


Cube Audio (Poland) designs single drivers and single driver speakers. 

Principals are Grzegorz Rulka and Marek Kostrzyński.

Link to the Cube Audio Nenuphar (with F10 Neo driver) speaker page: 

https://www.cubeaudio.eu/cube-audio-nenuphar

Link to 6Moons review by Srajan Ebaen (August 2018):

https://6moons.com/audioreview_articles/cubeaudio2/

----------------------------------------

Parameters (from Cube Audio):

Power: 40 W

Efficiency: 92 dB

Frequency response: 30Hz - 18kHz ( 6db)*

Dimensions: 30 x 50 x 105 cm

Weight: 40 Kg


* Frequency response may vary and depends on room size and accompanying electronic equipment.
david_ten
@debjit_g After four years of work getting my Coincidents to finally sound like a reference, I'm not feeling a big rush to try new speakers, but I still like the idea of putting the neo driver in a 1cuft sealed cube for a diy project and change of pace. I'm very attracted to the idea of eliminating the crossover. If I do take the plunge, I will most certainly use the tempo Electric wire inside the cabinet. Would probably go with 14ga as that's what I currently use on my mid-range driver (20ga to my tweeter & 12ga in the bass cabs).

~~~~~

And @charles1dad I wonder if Israel's stated preference stems from the fact that he sells his own copper wiring. Replacing the stranded copper (with a Teflon jacket) in my PREs with solid core silver reduced distortion, and increased texture, color, and naturalness. As you stated, the silver sounds smooth with a subtle warmth. I don't hear any tradeoffs at all. The only downside is increased cost.  I'm confident anyone with these speakers who did an a/b would prefer it.

And I don't blame you for leaving well enough alone inside the Coincident electronics. I've been using VH Audio's silver (5N, solid core) inside my electronics, but also still have a lot of copper in the various circuit boards. Routing new signal wire throughout all the pTp wiring would certainly be a laborious project. And as you state, they already sound so good...

~~~~~

Also, for anyone considering the option, Tempo Electric's 14ga is only ~$60/meter (x4 if you're buying a stereo set) with a 30-day free trial. It's a bargain.
@keithr Hopefully someone who's actually done the comparison will step in, but I suspect these two designs will sound very different. You can likely catch some of that if the read the two corresponding 6moons reviews and compare some if the descriptors used across across them...

E.g.:
See paragraph 3 here - http://www.6moons.com/audioreviews2/zu3/6.html
And whole page, but especially final paragraph here - https://www.6moons.com/audioreviews2/cubeaudio2/5.html


Cal,
That referral to 6 Moons is a good idea. Srajan Ebaen has been an admirer and user of Zu speakers for quite some time. He has reviewed a number of their models very favorably thorough the years.


He was very taken and struck by the Cube Audio Nenuphar and seems to place them in their own singular uppermost tier category for single driver speakers . He is astonished by their sound quality and presentation.  Although Zu utilizes full range drivers I realize that it isn’t a single driver speaker as is the Nenuphar.
Charles
Charles, interesting indeed. That said, Srajan likes a music genre that really i'm not into (world acoustic) and his writing is often confusing. 

I will say I heard the Voxativ 9.87 in a dealer's home and wasn't impressed as his (and others) reviews. That said, I don't believe it was broken in near enough. It had wonderful jump factor, but also clear as day, uneven frequency response issues in various parts of the spectrum. The bass was also dry.

I've been toying with the idea of getting a second speaker (YG is my first) and Zu/Cube are high on that list. The Druid VI is considerably less expensive, but seems to be more of a rock n roll speaker vs a classical one. I can say previously owning Definitions that the old Zu's strengths weren't on classical. The Druid VI bridges the gap much further but still doesn't seem like that speaker's favorite genre.
 
FYI, since Ag / Argentum, aka Silver is on the menu...

The SR speaker cables I used are high purity silver 99.999%

The Scott Sheaffer speaker cable I am using is also high purity silver, though I do not know the specific purity level. Knowing Scott, his sourcing and selection is impeccable.

As mentioned above, though Scott's cables edged out the SRs and I clearly prefer them in my system, the SR cables are superb.

Good to read the back and forth above. As @debjit_g mentioned, the thread had been dormant for a bit.