Thanks for posting. I'm ordering 4S11 in bulk & making the wires up myself. I've had Mogami Neglex microphone wire for speaker cable (fabulous up top but way too high a gage - very poor bottom end) and 12 ga zip cord (plenty of bass but poor definition up top). With the 4S11, I'm hoping for the top & mids from the microphone cable & the oomph of the 12 gage but with increased tautness & clarity. We'll see.....
- ...
- 47 posts total
It is quite possible any of the economical cables mentioned would best Synergistic Research, and/or make the cost difference unjustifed. I am reviewing a cable brand now that, based on my experiences at shows hearing SR, would likely best it. However, one would have to do direct comparison to know definitely. |
@bobinwi, I am sure you already know this, but each canare wire has 4 conductors in one jacket, so you have to connect two conductors in each banana or spade connecter. Not quite as simple as some wire. I purchased a 10' terminated pair from Blue Jeans Cable for under $100 plus shipping and perhaps they can be found cheaper from other retailers. Good quality terminations. Just wanted to mention this. |
recommendation for plugs ? I want to buy it from here https://www.audiophonics.fr/en/bi-wiring-amping/canare-4s11-star-quad-speaker-cable-copper-4x208mm-o... I consider these bfa plugs since i need 12 and don't want to pay 60 euro for 12 plugs https://www.audiophonics.fr/en/banana-plugs/dynavox-img2-banana-plug-bfa-gold-plated-o5mm-set-x4-p-2... |
- 47 posts total