Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure

Onhwy61,
Well, david_ten who has owned the Nenuphars for a couple of years could certainly chime in with some informed insight. Based on what I’ve read and heard about this speaker I’d say that probably 70% is attributed to the remarkable driver’s exquisite design parameters and its successful execution/implementation. Many hours and tedious effort along with extensive trial and error were required.

The speaker cabinet dimensions/geometry/physics and chosen material and construction technique probably account for the remaining 30%. If you carefully read the original 6 Moons review you will appreciate there was major effort needed to get the cabinet right. I believe that the cabinet plays a large role in the final sound quality that is not given suitable credit for.

The driver and motor/magnet assembly is an outstanding end result and would work beautifully in other DIY cabinets ( If well thought out ). But without question the special Nenuphar cabinet is a crucial aspect for this speaker’s resounding success. A ton of talent, effort, knowledge and patience went in to getting the Nenuphar right.
Charles

debjit_g,
Line Magnetic is an excellent suggestion for a very high quality tube (Particularly SET as well as push pull) integrated amplifiers. I’d also recommend that you consider the Italian Tektron brand as well. They offer quite a large stable of integrated amplifiers as push pull or SET. This is the brand of amplifiers that Cube Audio always selects in their European audio shows and demonstrations.

I believe that most of their models fall well within your budget range.
Charles

debjit_g, 
Here's another possibility.  The Canadian company Coincident has an integrated amplifier named the Dynamo. It is available in two versions, el 34 or 300b (A bit more expensive but I think excellent for the Nenuphar). Both of these are single end circuits rather than push pull. The latest versions have bigger and  better output transformers and beefed up power supplies. Worth a thought.
Charles 

If you want to stay with your FirstWatt amplifier, I have had excellent results with a tube preamp from Backert. All of their models have very long tube life and are very easy to tube roll (I recommend the Mullard 12au7).

Robert

thanks @stephendunn and @charles1dad. All excellent options and I will do some readings on them.

I remember writing to Tektron USA distributor before I bought the Nenuphars but did not hear back. I didn’t follow through at that time. Maybe its time to do a follow up. Has anybody heard in person how the Nenuphar sounds with the Tektron vs the First Watt or other amps ? I am hoping that the 2A3 can power the Cube’s to a comfortable listening level when the listening position is 8-9ft from the speaker.
I was also considering Triode labs, either a 2A3 or 300B integrated but they don't have a remote which is a deal breaker for me.

@rwpollock, yes I have heard great things about Backert. Which model are you using ? If I go with the tube pre route with the SIT-3, I am also considering Supretek DHT pre. I hope all these choices will be better than the BHK pre (which is no slouch) that I am currently using.