2. home-theater
  3. 160363-128813

Soundbar AND home theater - but only one HDMI ARC

 Help!  For my casual everyday tv-watching, I really don't want to use my whole HT, I just want my soundbar system to be in use.  However, this is NOT as easy as I thought, or am I missing something?
My tv's (Sony XBR-65X950G) HDMI ARC jack is going to my HT receiver.  So my Sony remote controls the HT receiver volume perfectly. 

However, now I cannot control my soundbar because it has to use the optical output from the tv and requires me to use my Harmony remote (wife hates it and I don't love it).
So, are people like me just out of luck?  I wish there were two ARC jacks on the tv!
So, again, if my HT receiver is using the HDMI ARC, is there no good way to also have a soundbar in the system and it operate the way it's intended? 
dtximages
dtximages OP
365 posts
 
@mahler123  No.. Why would i do that?  I have a home theater on the same tv that I also have a soundbar.  For normal watching, I don't want to crank up the entire home theater system and just want the simple soundbar.

Why am I worried about losing fidelity?  Same reason everyone on here is worried about it.
dtximages OP
365 posts
 
I've tried two different HDMI switches and neither work.  One, the sound bleeds through to the other system.  The other was just a fail.  I'm not sure why this is not a more common problem.
I figure a lot of people have a HT in their main living room but don't always want to watch the local news in full blown surround sound.
mahler123
3,374 posts
 
Sound bars don’t have a lot of fidelity that can be lost.  Even if you had a 10% drop in fidelity using an HDMI splitter no one could perceive a difference.
fwiw I used an HDMI splitter several years ago in an HT system for a few weeks.  I had bought a new component that required HDMI and my AVR, which was several years old at that point, was one of the first to have HDMI inputs but only two, and this was the third component requiring HDMI.  I used a splitter and then purchased a newer receiver.  I really didn’t notice any issues while using the splitter with the older AVR
More to discover