Good Morning @cycles2 ! From what I see on the DCS site, the Rossini DAC can only accept word clock input frequencies at 75-ohm;
"2x Word Clock Inputs on 2x BNC connectors, accept standard word clock at 44.1, 48, 88.2, 96, 176.4 or 192kHz.
The data rate can be the same as the clock rate or an exact multiple of the clock rate. Sensitive to TTL levels. Word Clock Output on 1x BNC connector. In Master mode, a TTL-compatible word clock appears on this output."
The Rossini DAC is a great a sounding unit, a couple of friends, on in Atlanta have it, the transport an the Rossini clock and the result sounds great used together. Unfortunately the Rossini clock does not accept a master clock input and I believe it's a VCXO, not an OCXO implementation (there is little published on it so I may be wrong so don't shoot the messenger if I am...).
Friends with DCS who have the Vivaldi clock have found that using a Cybershaft with it ups its playback quality and either use it plus Cybershaft to reclock Vivaldi or Rossini gear as follows;
Cybershaft drives -> Vivaldi clock drives -> Rossini or Vivaldi gear
All that said that may not be the feedback you were hoping for however those the limited permutations given what the DCS BNC inputs take in and what they do not.
Note: I'm not saying anything anything against DCS, just reporting what is possible.
If you go the Vivaldi clock route (or any other than can work, the best combo of Cybershaft gear is;
Model number: UPOCXO-OP21A-1 External DC dedicated
Model number: LTPW01P External DC power supply
next after that would be the OP20 level and then OP19 at lower price points.
***If you don't already own the DCS Rossini streamer/DAC, you MAY want to have a listen to the N-01XD (new with Esoteric's latest FPGA-based new DACs; they are fantastic and the N-01XD is already amazing the 3 people I know who have bought it.
You CAN then directly use any Cybershaft with the N-01XD or Esoteric P-02X/D-02X, Grandioso K1X, P1X/D1X, etc...
I've heard the new DAC implementations in the D1X; they are absolutely world-class, even more musical than prior top Eso offerings and given FPGA use and overall design they are future-proof. Believe they also do MQA, and other popular things but I am not a server/streamer customer so what I've seen on MQA, Roon, etc... is from reading their site.
Other options; from what I've heard and read, Aurender's W20/W20SE can take in a 10 Mhz signal.
SOULNOTE's S-3 CD/SACD player and D-2 DAC can also take pure 10Mhz. Reading between the lines of a couple of communications, I think they are also working on other new things for their top offerings but have nothing concrete to state at this time.
Hope this helps...
"2x Word Clock Inputs on 2x BNC connectors, accept standard word clock at 44.1, 48, 88.2, 96, 176.4 or 192kHz.
The data rate can be the same as the clock rate or an exact multiple of the clock rate. Sensitive to TTL levels. Word Clock Output on 1x BNC connector. In Master mode, a TTL-compatible word clock appears on this output."
The Rossini DAC is a great a sounding unit, a couple of friends, on in Atlanta have it, the transport an the Rossini clock and the result sounds great used together. Unfortunately the Rossini clock does not accept a master clock input and I believe it's a VCXO, not an OCXO implementation (there is little published on it so I may be wrong so don't shoot the messenger if I am...).
Friends with DCS who have the Vivaldi clock have found that using a Cybershaft with it ups its playback quality and either use it plus Cybershaft to reclock Vivaldi or Rossini gear as follows;
Cybershaft drives -> Vivaldi clock drives -> Rossini or Vivaldi gear
All that said that may not be the feedback you were hoping for however those the limited permutations given what the DCS BNC inputs take in and what they do not.
Note: I'm not saying anything anything against DCS, just reporting what is possible.
If you go the Vivaldi clock route (or any other than can work, the best combo of Cybershaft gear is;
Model number: UPOCXO-OP21A-1 External DC dedicated
Model number: LTPW01P External DC power supply
next after that would be the OP20 level and then OP19 at lower price points.
***If you don't already own the DCS Rossini streamer/DAC, you MAY want to have a listen to the N-01XD (new with Esoteric's latest FPGA-based new DACs; they are fantastic and the N-01XD is already amazing the 3 people I know who have bought it.
You CAN then directly use any Cybershaft with the N-01XD or Esoteric P-02X/D-02X, Grandioso K1X, P1X/D1X, etc...
I've heard the new DAC implementations in the D1X; they are absolutely world-class, even more musical than prior top Eso offerings and given FPGA use and overall design they are future-proof. Believe they also do MQA, and other popular things but I am not a server/streamer customer so what I've seen on MQA, Roon, etc... is from reading their site.
Other options; from what I've heard and read, Aurender's W20/W20SE can take in a 10 Mhz signal.
SOULNOTE's S-3 CD/SACD player and D-2 DAC can also take pure 10Mhz. Reading between the lines of a couple of communications, I think they are also working on other new things for their top offerings but have nothing concrete to state at this time.
Hope this helps...