How come there is no thread on the RealityCheck?


In my opinion this one the greatest improvements in audio in 40 years. AA is full of discussions about it, but there has been nothing here. Maybe that a $575 tweak is beyond Audiogoners?
tbg
Jayctoy, I find the RealityCheck results far greater than these alternatives. I had been using them on originals for years, and although the improvements proved substantial, they were never of the level achieved here. Also more recently I have tried using the RealityCheck black blanks in my computer to redo originals including all of the cleaning prior to burning. Again the results fell far short of what I got with the RC. I even tried burning another RC blank using the copy I had made on the computer using the RC blank and copying it using the RC reproducer. I then compared it with a prior direct copy from the original using the RC. I heard no difference between the two copies.

I have found benefit to using the Furatek demagnifier on the cdrs, but no benefit using the AudioDeck trimmer. Even the post by Slothman above citing work by Genesis Tech. shows the importance of the blank used, how it is cleaned, what is used to copy it, and the burner software. All that I really know is that I very much enjoy the further benefits I derive from the RealityCheck that I have not otherwise been able to achieve. Maybe as Audioengr suggests a better burner would outperform the RC. That maybe true, but the jury is still out at least as far as I am concerned.
Norm, can you send me one copy of the RC,I would
like to hear it for myself.Your post tells me, the
RC copy is worth listening, I will pay you, for the
shipping and cd.If indeed the copy are much better,
I will buy the unit.Thanks
My RC is with my technician and he is building a transformer-based power supply for it.
He tested it today and it crapped out. He will have to make the power supply *much* more robust. I'm a little worried about the cost of this; I hope it will be worth it.
Exlibris-

Tbg sent me pictures of the stock SMPS, it's a:

AK2 A65A1-02M
65 watt output
+5 volts at 3.5 amps
+12 volts at 4.0 amps

Sounds like your tech either under rated the amps on the transformer or regulator. Did he measure the current draw on the +5v and +12V rails?

There's some great off the shelf linears available for under $100.

I'd be happy to upgrade the SMPS for you, if you're interested. See my system.

Anything that reduces power supply noise in digital circuits, should be worth the effort.