The Mutech RM Kanda Hyabusa

I really like a dynamic performance so I plan on moving over to a current mode phono stage and low impedance cartridge. I really like the Lyra Atlas and the impedance is a lowish 4.2 ohms but the lower the better and The Mutech is one of three or four cartridges with very low impedance and there are not a lot of reviews on it yet.

The Terminator has the same problem that other arms of it's type
have. I have seen it do it. Consequently lewm I would never consider  one. As for friction, the Reed has the same friction as any other arm. The Schroder actually has less friction horizontally than any other arm assuming it has decent bearings. It is a brilliant design for this reason. Friction of the stylus in the groove pulls the arm forwards as the arm has no offset. Because the horizontal bearing is off on a lever arm this forward pull is magnified pulling the mechanism forward. The magnetic guide has no friction at all. The pull overcomes any friction further reducing any side forces on the stylus. So, which one would you get, the wooden arm version or the magnesium arm version sold by Xact Audio? 

Which current drive phono stage do you plan to buy?
I am hardly in a position to argue you should by a Terminator tonearm.  I decided long ago that no matter how great linear tracking tonearms might be, I don't want to bother with the pumps, filters, noise, etc, associated with their use.  If I did decide to put up with it, I would indeed place the Terminator at the top of my list for its brilliant design and modest cost.  That lack of pumps and other paraphernalia is to me what makes the Schroeder LT and maybe the Reed most tempting.  Anyway, I would be interested to learn how it goes with whatever current drive phono you select.  I have long been hooked on the BMC MCCI, as an idea.

The BMC Signature ULN is a beautiful little phono stage but in that price range I think I would go with the Lino C because it has an uncorrected output you can use with computer correction and a battery power supply.
I hope to get the Seta L20 because it has three inputs and the lowest signal to noise spec of any phono stage out there. It also has a MM input just in case I prefer one for Rock over a current mode MC. I love the Clearaudio Charisma. It is a blast playing rock and jazz.  Only problem is the price but in a year or so I should be able to manage it. I wull certainly let you know how the Schroder fares as I am pretty sure that will be my next arm. The only thing the Reed has over it is the ability to swap cartridges fast as it has removable arm wands like the Graham. 

Since this is your thread, I guess it's OK to go off-topic.  Do you mean to say the Lino C permits RIAA correction in the digital domain?  Does it have a digital RIAA built in?  That would involve, of course, ADA conversions, which I don't fancy myself.

If using digital riaa one might well use a (really good) mic preamp from studio world.