2. speakers
  3. 162538-154953

Do speaker wires matter

I recently was given a pair of Mirage M1 speakers. All highs, mids and lows work but I don’t believe they sound like they should.

The tweeters are not giving the detailed highs. I am not sure if the mids and lows are where they should be.

i am currently using a vintage 2226b Marantz I just had restored. Impedance is 8 ohms and it only puts out 26 wpc. I know these speakers require A much more powerful amp. I’ve done a little research on this.

im wondering if the speakers could not sound as good because of the Marantz and/or also because of the speaker wires I’m currently using. I don’t know what gauge they are. They were given to me as well. Any advice would be greatly appreciated.

i did also find a Mirage technician in Canada who still repairs them if I’ll have to take that route. No turning back now 😊
em2music
mofojo
2,310 posts
 
"Never even consider anything less than 92dB. Just cross it off your list. Too many fabulous sounding 95dB+ speakers out there to be killing yourself trying to solve a problem so easily avoided.  "

Funny! The few Tekton speakers I've seen the measurements for have been under 92db. Although they are stated to be higher.
three_easy_payments's avatar
three_easy_payments
2,097 posts
 
OP stated he has a 26wpc amp with 8 ohm output impedance. His speakers are 83dB, 6ohm. The speakers are not the best match for sure, as he will benefit from moving to a speaker presenting an easier load. A Tekton 4 ohm speaker wouldn't be my first choice (although it would "work") and I wouldn't want to pair that amp with a speaker designed by someone who claims 8 ohm designs are obsolete anyway.

There is a whole world of 8 ohm speakers with 90dB+ sensitivity to consider based on your sonic tastes.  Don't let anyone try to direct you into just one brand....that only means they have an agenda.  Way too many choices in the market for that ridiculousness.
lowrider57's avatar
lowrider57
5,418 posts
 
+1 three_easy. And IME, there aren’t tons of 95dB+ speakers available.
OP... I think you’ll find many more speakers are in the 90dB+ sensitivity range. And 8ohm is preferable for your amp.

corelli
1,027 posts
 
Had a pair of Mirage M-5si.  A Rotel 990 power amp drove those to good effect (into 4 ohms was putting out well over 300wpc)  Phenomenal room lock in the bass from two 6.5 inch woofers!  The mirage speakers were clearly voiced on the dark side so don't expect a lot of sparkle from the tweeter regardless of amp/cables.
berner99
216 posts
 
Agree, mine are warm and a bit laid back. If you like bright forward speakers...there is no shortage of options.
More to discover