If you need just a cartridge for that old Pioneer look for Audio-Technica MM cartridges under $150
Inexpensive MM Cartridge
Hi All. I'm helping a friend who has a late 1970's Pioneer PL12 turntable. The manual TT is in good working order, bearing and motor lubed, etc. We need a MM cartridge to mount on the stock S-shaped tonearm. Budget is up to around $300. Suggestions please! Thanks, and Happy Holidays!
- ...
- 61 posts total
@chakster I made a small typo - I meant a Pioneer PL-512. Nothing special, but still rated as a very good TT. I get the sense that it is on par with modern entry level TT’s. Does anyone think differently? I think replacing the TT and cartridge would cost between $300-$600, most likely used. Worth considering??? @yogiboy and @roberjerman, I had a Grado Black mounted on it and was not too impressed. I noted a hollow sound with poor resolution. No hum at all though. Is there notable improvement up the line? @petg60 how about a Goldring 1042? Elliot, I will check out the AT offerings. Other recommendations or votes? Thanks, Peter |
@bkeske A source of concern with the Goldring is the following: 1) The Cartridge is very sensitive to capacitive loading. Some experimentation with it will be necessary to get the best match to your system. I ended up with 51 kOhm resistive Load and 120 pf capacitive load (plus the Tonearm cabling - probably another 50 pf or so). 2) The cartridge is a little more than usual sensitive to VTA (Vertical Tracking Angle) adjustments (for a Moving Magnet Cartridge), so experimentation is on order. For this setup, there is not adjustability to cabling or capacitance in the phono preamp, and the tonearm has no VTA adjustment. Perhaps there is a cartridge that is less sensitive to these non-adjustable features? |
- 61 posts total