Thoughts on a cartridge


Hey Everyone 
I have a RP3 on the way and I purchased it without a cartridge and am wondering if anyone has experience with a Goldring 1042 or possibly a ortofon bronze. It’s probably splitting hairs however who would argue with a little more detail and clarity especially w vocals. Thanks for the feedback as based on your experience 
johnspud
I have a friend who has he Goldring- sounds quite good- it is a lively cartridge. I like it
The 1042 is by all accounts a fine cartridge. It has an unbelievably grand stylus for it's price category. One of my cartridges has a Gyger S stylus and it is one of the quietest tracking styli I have ever heard. It is however very critical of azimuth adjustment. It has a very small tip radius and large contact area. The oncoming face of the stylus is almost dead flat and as far as SRA is concerned should be 90 degrees to the surface of the record which will give you the proper 92 degree SRA. The RP3 does not have an azimuth adjustment but the cartridge can be shimmed if necessary. It is critical for the stylus to be exactly vertical to the surface of the record. Forget about crosstalk. It is not what you are trying to achieve. So get out your loops and a bright light. Placing the stylus on a mirror always helps. Hopefully you will not have to touch it. 
The only other cartridge that I would consider in this context would be the Audio technica VM760SLC another very fine cartridge for the money. The 2M Black may be a little too compliant for this tonearm. You can always add mass but it is tough to take it off!
Thank you for your technical feedback and knowledge - since this is my first table and I’ve never mounted a cartridge I will stick to something more straight forward . I will take a look at the AT - 
happy new year !!
Personally, I wouldn’t let the finicky set-up talk keep you from considering the Goldring. I think the talk is somewhat exaggerated. No, it is not an elliptical stylus that is more forgiving, but that is a great thing at its price point. My main cart, the Soundsmith Zephyr, shares the same/similar stylus shape with the Goldring and costs 3x more. The Goldring also shares a very similar neutral sound, good tone, and detail of the Soundsmith. Seriously, when comparing the two, the 1042 is a bargain when you compare it to the cost of the Zephyr. And that is what I was looking for when purchasing a back-up, to use when I need to get the Zephyr serviced/retipped, similar sound, tone, and refined detail.

AT’s are fine carts as well, but have a different sound signature to the Goldring 1042, Ortofon Black, or most all Soundsmiths. It really depends on your preference in what you desire sound-wise. For me, they are a bit bright. But again, that is a personal preference.

But I’ll throw another option into the mix, a Soundsmith Otello. The downside to that is, it does not have a replaceable stylus, so you lose it for a while when sent in for retipping. Then, you need a back-up. Which is why I bought the Goldring.
Thanks for the info - do you think the sound smith would mount relatively easily with the RP3?

I have pro Ac super tablette speakers which are naturally bright with a frontal soundstage so a warmer cartridge would in my opinion be helpful