2. analog
  3. 163521-156479

15 foot RCA cables out of TT with no pre amp?

Im very limited with the space I have. This is kinda limiting me to keep the turntable on a 15’ cable. I’m using a Pro-ject Carbon Debut Evo with an Ortofon  2m blue to an Onkyo stereo with a phono input. Cables are midrange, nothing special but not total crap. Just wanted to get some opinions or suggestions on this. How bad the loss is gonna be if there is any. 
jacquesbarteaux
pindac's avatar
pindac
2,782 posts
 
As a temporary set up, if possible.
Place the Onkyo as close to the TT as possible and use a shorter IC.
Does Temporary arrangement require a Longer Speaker Cable ?

If it works you can then Try the Long and Short IC configuration.

Using a separate Phonostage, as already suggested, with the Onkyo will also offer other configuration options.  
mijostyn's avatar
mijostyn
8,492 posts
 
You will be screwing up the high frequency response of the cartridge using a long cable. There are many inexpensive phono stages you can buy. Put it by the table and run the long cable from it.
tomstruck's avatar
tomstruck
350 posts
 
Keep your turntable cable as short as posable and get a phono pre with XLR output you need a phono for that distance 
geof3
1,128 posts
 
Doubtful the Onkyo has balanced inputs. If it does, XLR outs are a good idea, but would need a new cable too, and they are usually more expensive than their similar quality RCA counterparts. At the level of TT etc. you could pick up a Pro-Ject phono box for less than 100.00 and be good to go.
jacquesbarteaux OP
4 posts
 
So, if I’m hearing this correctly. I should use the 1.23m cable provided to a phono stage. Then after the phono stage, the long cable will suffice? 
More to discover