@rauliruegas But Raul, my meager brain thinks Lofgren B sounds better overall. Maybe it is just because I set it with the SmarTractor. Your not going to argue with my ears are you? That would call for an extreme emotional discharge and even some name calling.
Review of the SMARTractor and SMARTstylus
I mounted an AudioTechnica VM95ML on the Sota for it's new owner using these tools for the first time.
The Acoustical Systems SMARTractor: On taking the unit out of it's box you immediately get the feeling you are dealing with a fine precision instrument. Construction quality is through the roof. It is child's play to set it up. The only kink I ran into. It was very difficult to push the locator pin (points to the vertical axis of the horizontal bearing) through the beam. I had to tap it with a small hammer. The grub screw was backed way out. The nylon plunger used to prevent marring the stainless steel was a very tight fit.
You set the alignment by removing the pillar's locating screw then twist the pillar lining the index mark with the line labeled with the alignment you want. I chose Lofgren B. You the place it on the platter which you should lock in place, line up the locator pin with the horizontal bearing and lock the beam in place. The Syrinx made this easy as it has a perfect dimple right over the horizontal axis. Next you place the magnifier in it's bracket and line it up with the Lofgren B grid. The grid lines are super fine and close together. They literally light up on the mirrored surface. Super easy to see.
You line up the cross hair with the targeting grid on the mirror. This puts your sight line right down the cantilever and boy does it work! The magnifier makes it darn easy for old eyes to line things up perfectly.
Now for the SMARTstylus. This is just a piece of plexy with four sets of grid lines, vertical, horizontal and SRA, and VTA. It comes with it's own hand held magnifier. It looks well made. It is also close to worthless with an offset arm that has a permanent finger lift. Both the offset and the finger lift keep you from getting it close enough and angled correctly to the cantilever. I will try it again with the Schroder which does not have a finger lift.
In short, the SMARTractor is a brilliant, well thought out devise manufactured to the highest standard. It is handily the most accurate, easiest to use cartridge alignment tool I have ever used. Is it worth $700? I have to say that if you love vinyl and want to be sure your cartridge is dead on, Yes absolutely. On the other hand at this time I have to say that the SMARTstylus is a waste of money. The VM95ML? Darn! It punches way above it's price point. It is handily the best sounding under $200 cartridge I have ever used. It is neutral, tracks well and is very quiet. It is as quiet as my $2000 Charisma. If you are after a MM cartridge in this price range you can not go wrong. You can be perfectly comfortable buying it blind.
Hope this helps people,
Mike
The Acoustical Systems SMARTractor: On taking the unit out of it's box you immediately get the feeling you are dealing with a fine precision instrument. Construction quality is through the roof. It is child's play to set it up. The only kink I ran into. It was very difficult to push the locator pin (points to the vertical axis of the horizontal bearing) through the beam. I had to tap it with a small hammer. The grub screw was backed way out. The nylon plunger used to prevent marring the stainless steel was a very tight fit.
You set the alignment by removing the pillar's locating screw then twist the pillar lining the index mark with the line labeled with the alignment you want. I chose Lofgren B. You the place it on the platter which you should lock in place, line up the locator pin with the horizontal bearing and lock the beam in place. The Syrinx made this easy as it has a perfect dimple right over the horizontal axis. Next you place the magnifier in it's bracket and line it up with the Lofgren B grid. The grid lines are super fine and close together. They literally light up on the mirrored surface. Super easy to see.
You line up the cross hair with the targeting grid on the mirror. This puts your sight line right down the cantilever and boy does it work! The magnifier makes it darn easy for old eyes to line things up perfectly.
Now for the SMARTstylus. This is just a piece of plexy with four sets of grid lines, vertical, horizontal and SRA, and VTA. It comes with it's own hand held magnifier. It looks well made. It is also close to worthless with an offset arm that has a permanent finger lift. Both the offset and the finger lift keep you from getting it close enough and angled correctly to the cantilever. I will try it again with the Schroder which does not have a finger lift.
In short, the SMARTractor is a brilliant, well thought out devise manufactured to the highest standard. It is handily the most accurate, easiest to use cartridge alignment tool I have ever used. Is it worth $700? I have to say that if you love vinyl and want to be sure your cartridge is dead on, Yes absolutely. On the other hand at this time I have to say that the SMARTstylus is a waste of money. The VM95ML? Darn! It punches way above it's price point. It is handily the best sounding under $200 cartridge I have ever used. It is neutral, tracks well and is very quiet. It is as quiet as my $2000 Charisma. If you are after a MM cartridge in this price range you can not go wrong. You can be perfectly comfortable buying it blind.
Hope this helps people,
Mike
- ...
- 33 posts total
- 33 posts total