Are the new Ohm Walsh speakers Audiophile quality?


Considering buying the Ohm Walsh 2000 Tall but very few reviews has me questioning there quality. Any thoughts?
sixsigmaguy
Regarding power needs for the Ohms, the question is how loud do you listen? 

I'm currently running my Ohm 1000s with a Schiit Aegir amp which is 20 watts/ch at 8 ohms and 40 watts at 4 ohms. (The Ohm 1000s and bigger are 6 ohm speakers.)  I am really enjoying this setup -- my prior amp was a Hypex with 150 watts/ch at 8 ohms (and a Bel Canto C5i prior to that) and I like the sound with the Aegir better. HOWEVER, my average max listening level is 85 dB. When I got the Aegir, I actually hooked up a meter to monitor the amp's output while I listened. I use about a quarter of the Aegir's power with peaks going to about half, with no sign of strain.  

The catch is, if I listened more loudly, say 90 dB or higher, then I would quickly run out of power. So, if you want to listen at anything near 90 dB or higher, you are going to want an amp with much higher power that also has good current delivery. 
I run my ohm100s (8”driver in refurbed Walsh 2 cabinets) off 60 w/ch 8 ohm Bel Canto c5i. Drives them to modest listening volume on a large family room up to upper 80s db which is a decent and safe volume but you probably need more to go louder.
Some use Ohms with active crossover and subwoofer. That can get you up there done right.

I threw the kitchen sink at my larger Ohm 5s (12” driver in large refurbed Ohm F cabinets) and that setup is the bomb at any volume. Bel Canto ref1000m monoblocks, 500 w/ch 8 ohm.

Like most the larger Ohms tend to be more efficient and will go the extra mile compared to smaller. 
I have a larger main living area that opens to the kitchen and up to a catwalk above for the upper level. Evan said I need a 4000 for this space. I ordered them new without ever hearing them. Three month wait. Should be here in April. Who cares, it's only money. 

I spent the money on these because I never sit when I listen to music. I move around. I also listen to a lot of live recordings, and loudly. 

I have not settled on my electronics yet. Perhaps @mapman can help me out. I have needs for a setup that is family friendly, so a pre and amp with 12v triggers is intriguing. But, I really think it would be fun to put a PrimaLuna preamp with a solid state amplifier on it. Is a tube pre on these new 4000s a good idea or should I stick with solid state all the way?

I think OP is right to wonder about the power requirements - Ohm told me to go big. 
Class D for the 4000s? Or AB? I've been considering Peachtree amp500, or a Rotel RB-1582 MKII, or a Musical Fidelity M6s, or a Parasound A21+. In all cases I'm at 200wpc minimum per Evan and John's advice. But would 500 watts be too much? Are my kids going to blow these speakers up? Would a Rotel RC-1590 preamp with that Rotel 1582 amp be too harsh in the upper end, or would a tube pre soften things up in a good way? I'm not afraid to use tone controls.

I've also considered Nord Acoustics class D amps. For some reason I'm afraid of class D? 

These are the questions literally keeping me up at night. Nerd alert. 
Tube preamp works great. Just make sure amp input impedance is 40-60kohm or higher for minimal distortion and best results.
200w/ch into 8ohm is good. 500 will only push things further.
My setup with larger Ohms is Audio Research sp16 tube pre to Bel Canto ref1000m Class D amps 500 w/ch into 8 ohm doubling power into 4. Doubling power into 4 ohms is another desirable amp attribute for best performance with larger Ohms.

https://photos.app.goo.gl/96SbeuZEWj5ueG8T8

No reason to fear Class D. Good ones sound great these days and Ohms love it. More bang for the buck and more efficient/cost effective/compact and easy to deal with. God Bless technology and innovation!