DEBRA / SWARM DSP?


I’ve been trying to learn about room treatment and Room EQ Wizard (REW). In my research so far, It seems DSP is not a great idea for the main speakers in 2ch system, but it might be a good idea to use DSP for subs. In my DEBRA sub-array, it’s a little different in that I have 2qty SA1000 Dayton amps instead of the standard 1qty SA1000amp for all 4 speakers. I have 1 amp for the left front/rear subs and the other amp for the right front/rear subs. Will this work with the mini DSP? The mini DSP has 2 inputs and 4 outputs. I don’t see how to run the software/ correction/alignment with 2 subs being run off of 1 amp per side. 

BTW, I'm running the speaker level out from my tube amp through 1k and 10k transistors and terminated into 1 rca per side which go into the 2  SA1000 amps...1 input per side 

Any knowledge you may be able to impart would be greatly appreciated.
veerossi
That is quite a system you got there MC. I hope to someday hear them Moabs. I'm curious to see/hear how they compare to my Tannoys- especially in your system since we share a tube amp and somewhat similar sub setup (except mine doesn't go to "11" with a 5th sub). 

I'm thinking there is no way to run separate DSP to adjust delay time or EQ separately without having to run 1 amp per sub. 
I wish I would have known that LOC setup years ago. I would have been into SET tube amps a lot sooner.

Kenjit: All you need to know is DEBRA likes to go boom boom long time.
You are welcome any time veerossi. Never heard Tannoys so can't say much except Moabs are pretty darn impressive. Especially since mine have been taken apart and treated to some crazy good tweaks that must sadly for the time being remain secret. (Or at least off-line.) Clean, clear, dynamic and detailed without any edge or hardness, and able to play good and LOUD with little power and no strain, they are the perfect speaker for me. Or to paraphrase the Tommy Lee Jones line in No Country For Old Men, "If its not it'll do till the real one gets here."   

What I would like to hear is this same setup with a SET. Bet it would be mesmerizing- even more mesmerizing I mean!   

I came here looking for help before doing that LOC mod. Something I always knew was possible but never knew how until, necessity being the mother of invention, I went looking. https://www.epanorama.net/circuits/speaker_to_line.html

Kind of wondering why you want DSP? Dayton already gives you a lot of range, and with four subs the bass ought to be pretty darn smooth already? Have you tried connecting them series/parallel to hear which you prefer?
I have a miniDSP 2x4HD on my 4 sub array with the same amplifiers (thanks so much Duke!).  As MC states, you'll be limited to one set of DSP settings per amplifier.  Perhaps not ideal, but in the end you're really correcting for 1 listening position, not 4 subwoofers. 

The miniDSP paired with REW and a calibrated microphone (e.g., the umik-1) is really a wonderful tool.  Make the measurements at the listening position and immediately import directly into miniDSP to create the appropriate filter.  *Many* more options and flexibility than the onboard EQ settings on the Dayton, and if you're set up correctly, you can make all the changes directly from your listening position.  I find that invaluable for evaluation accuracy.  So much easier than getting up, moving a tiny knob without feedback, and then sitting back down and trying to figure out how the sound changed.  
Cal, did you find the miniDSP 2x4HD to be useful for making delay adjustments or did you just use for EQ? How do your amp and subs wired?
A. 1 amp for 2 front subs, 1 amp for 2 rear subs?
B. 1 amp for LEFT (front/rear subs), 1 amp for RIGHT (front/rear subs)?
C. Or some other way?

I am wired B