@williewonka OK. The thread had few additional brands/types of cables so it was confusing. Now, it is more clear if you still stick with your preferences on your website. Thank you.
Duelund conversion to DIY Helix Geometry Cabling
I have been an avid user of the Duelund cabling for over two years now and have used them exclusively in my system with great results. I have built many for friends and have used a full loom of interconnects, speaker cables, power cords and an extensive wiring modification for a previously owned balanced power conditioner utilizing Duelund 600V PolyCast wiring which was transformative. My cabling desires can be a little addictive as I have owned and evaluated 40+ brands of cabling costing more than an entire stereo system!
Over the past six months I stumbled upon a thread here on Audiogon in regards to a Helix designed cabling and as you probably already know, I just had to look a little deeper into this cable design…After a month of studying and sourcing parts, I decided to reach out to the designer/architect, Williewonka who gave more insights and philosophy on how the cable came into existence.
That conversation got the ball rolling in converting one of my KLE Duelund interconnects to Steve’s Helix designed which only entailed replacing the neutral with a Mil-Spec 16 AWG silver-plated copper wire with the neural wire being 3 times longer than the signal wire and of course the “Coiling” of the neutral wire : )
After the modification was complete, I was not sure what to expect from the Helix cabling but I was quite shocked with the results with “ZERO” burn-in time…The sound stage became much wider/deeper with a much tighter/focused image and clarity/transparency is like nothing I have ever heard in any cabling regardless of cost. In fact, I just sold a full loom of a commercially designed Helix Cable that’s renowned around the world and has more direct sale than any cable manufacturer; these $200 DIY Helix Cables walked all over them…
I believe you will hear the same results as I have and have heard back from friends who have already modified their Duelunds with the same results; WOW! Remember the cables will need 200+ hours to burn-in and settle into your system. My system is now 90% DIY Helix to include IC, SC, PC and Coax with each cabling adding its beauty of an organic and natural presentation that draws you into the fabric of the music.
You can tailor the sound of your cables using Duelund, Mundorf silver/1% gold, the outstanding Vh Audio OCC Solid Copper or Silver with Airlok Insulation or your favorite wiring and you can change it at any time…
http://www.image99.net/blog/files/category-diy-cables.html
https://forum.audiogon.com/discussions/difference-in-sound-between-copper-and-silver-digital-cables
https://forum.audiogon.com/discussions/adding-shielding-to-existing-cables
Enjoy,
Wig
- ...
- 948 posts total
@celo - apologies for any confusion - I do realize there is a lot of new information on this thread with so many different options and individual preferences of contributing members. I do endeavor to update The HELIX web site as soon as possible, but there can be a bit of as lag between what is posted here - and what is posted on my site. - An example of which is the use 2 x 16 gauge wires for the Live conductor of the power cables, which is not currently posted on the HELIX site This thread is much more active than The HELIX site, with other members providing feedback on their variants Members feedback lately has been pretty active, with several very worthwhile contributions from other members Hopefully this will level off and allow others reading this thread for perhaps the first time to digest the wealth of information it offers But for a less dynamic read, The HELIX site is a good place to start Regards - Steve |
To make things more confusing several of us use 2 - 12 gauge Neotech on the live of our power cords. I use this for amps, preamps, and conditioners. I use 2-14 gauge Neotech live conductors on all else. None of it stripped for the power cords.That is the recipe I like the sonically and safety wise. What is good and fun about this is that the general design just works and you can decide what you want to do with the reported variations. They all sound fantastic and no one choice can ever be best in all systems and for all preferences. |
Thanks @grannyring and @williewonka for your insights on the different wire types. My system is very revealing and could be bright if not carefully matched. I have ordered some of the Neotech wire to give it a try. Do you have any recommendation for speaker cables suitable for a balanced differential output amp? |
@divertiti I would give these a try- https://silversmithaudio.com/fidelium-cables/ Inakustik is another great performer, but a little expensive The are reasonably priced and from everything I have read/watched they are great performers at a "reasonable" price point Search the forums for observations of other members This one used the Neotech UP-OCC copper mentioned on this thread Mogami 3103 Deluxe Deep Cryo Treated - Speaker Cables - (takefiveaudio.com) Regards |
- 948 posts total