A question of loading...

Dear @daveyf  : Yes, any cartridge can't track the LP grooves in precise way but not for the loading but because all imperfections that the analog alternative has. Pivoted tonearms does not helps but increment the tracking problems and the LT too.

There are several threads where we discussed all what is happening down there at the stylus tip during playing and it's " terrible " for say the least.

MC are almost immune to impedance loading. Problem is not there, but yes a cartridge always performs with mistracking but if we can detect the mistracking in the cartridge play behavior then something is wrong in the overall set up or the cartridge tracking abilities are poor. Again, loading is out of that mistracking.

Even with all the analog alternative imperfections I know we have a lot of fun with or at least we are accustom to.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.

In 2018 thread where wyn posted and before the first wyn post you posted not one but twice:

""" When you load at a very low value (like less than 100 ohms) its possible to reduce the cartridge output and also decrease high frequency tracking abilities. ( Btw, wyn runs his mandake at 60 ohms and performs fabolous. Obviously no tracking issues. )


"" the cartridge is asked to perform more work as it has to drive the lower resistance. This makes the cartridge cantilever stiffer and less able to track higher frequencies. This is why the resistor can act as a tone control. ""

Yes, and this is all correct. Note the use of 'is possible' in the first paragraph, and the use of 'can' in the second. These modifiers must be considered in the use of English as a language.

Other curious things that happened with you in those threads in 2018 is that in both threads JC participated and in both threads he not supported with a post the conversation you said took place in Munich when talked about that low load impedance consequences. Weird.

This is innuendo. Come up with a link- and I will talk to JCarr myself if he is denying that conversation took place, but I doubt that is the case- he's been pretty steadfast. What is more likely is you are using a logical fallacy or simply misunderstood due to the language barrier. The latter has happened before on other threads.

MC are almost immune to impedance loading.

Well it took a couple of years but we're finally in agreement- nice to see that you've come around.

Dear @daveyf  @fsonicsmith  and friends:  Why I don't took in count before:

in the thread where J.Carr shared his white papers ( load impedance/capacitance/inductance. ) and where he posted 6-7 times and in the Agon 2018 thread I mentioned J.Carr not even did mention about that cartridge mistracking behavior but he no where in any thread and certainly not in the WBT one J:Carr never mentioned not even near about that " increment of clicks and pops " ! ! !   GO figure  ""

That " clicks and pops " is a big and false tale/lie/disinformation/fraud or just name it as you want it.

Additional to that does not exist all over the internet any white papers about both subjects. DOES NOT EXIST NOTHING AT ALL ! ! !  No measures of any kind about even that in the two other threads and in this one some of us asked for and he just as always: dead silence because has nothing in hand that can prove it. Period and I mean it.

It's incredible to been discussing seriously both subjects and no one exist ! ! ! 

Next info is what J.Carr posted about the consequences that we can read in his white papers:


""  As most phono stages are designed are right now, the input resistor needs to serve two functions. The sonically dominating function is to make sure that the resonant ultrasonic spike isn't so large that it affects the behaviour of the phono stage. The sonically lesser function is to load the cartridge. I would like to see these two functions separated so that we can start discussing cartridge loading in terms of what it does for the cartridge, rather than as a phono stage band-aid in disguise.

How heavily contaminated (or not) your audio system's environment is by conducted and airborne noise in the frequency-peaking bands will also play a role.


 if some electronic component in your house is producing RF, this could preclude you from using higher resistive values for loading.  """



Now I can really laugh of that biggest audio " tale/lie " in the all audio history and now I understand why JC don't supported that man and his " tale ". Pity for say the least.


Regards and enjoy the MUSIC NOT DISTORTIONS,
R.

Raul-you are quite the enigma. Sometimes it seems that you are arguing about things that you falsely perceive the rest of us are arguing about-but aren't-and at other times you seem to misunderstand the entire topic. We can be talking about the weather and you start talking about the meaning of life. You probably will misunderstand my analogy too. This might get hilarious. 
Even your signature line is grammatically flawed. It should be "Enjoy the music and not distortion". You are missing a critical word "and" and you have erroneously applied the plural to the word "distortion". And this is before I get to the fact that your premise that music can be recreated without distortion is fundamentally flawed and your apparent belief that some people only enjoy the [inherent] distortion to the exclusion of the attendant music is also absolutely flawed. 
I am willing to bet you would be a great guy to have a beer with in person but your online persona is so clouded by your poor grasp of English that things go sideways fast. 

@fsonicsmith Let’s give Raul some credit here. He is posting in a foreign language about technical issues that are somewhat difficult to extrapolate on even if you are fluent in the language. I appreciate the fact that Raul clearly is one of the more dedicated audiophiles here- and while i may not agree with some of his posts, I do think he contributes points of interest. I know that if we ( natural english speakers) were attempting to do the same thing in Raul’s native language on a foreign web page, I seriously doubt we could make ourselves understood as well as he does. ( even if we have to translate a little in our minds as to what he is trying to put across..:0) ).