Yamaha as-3000 with Denon dL-103R low output MC cartridges

@dekay you advised Yamaha's MC section is set @ a "fixed" 50 ohms (100 ohms is the recommended load for the Denon). 
im sorry I’m totally noob here so what issue will happens at fixed 50 ohms against sl-103r?
In other words, you means dL-103r on as-3000 integrated is a no no?
Or you means 50 ohms is still can play with dl-103r, but 50 ohms cannot push dL-103r to its fully potential?
thanks on advanced.

Vuth...:

No, it may sound fine with the 50 ohm fixed load, but then you will not be able to experiment with other loads (you did mention "full potential").

Considering how positively the phono section of your amp is reviewed, and that it has enough gain, I would give it a go (and I'm not a gambler).

Perhaps it's possible to increase the load via cable choice and/or another method if you wish to experiment?

Anyone want to chime in on this?

DeKay

Thanks @dekay . Its much clearer now. Im sorry Im not English native so I confirm step by step:)

Vuth...:

Wow, an Audiosylum member for many, many years and this is your first post.

Welcome to the forums - konnichiwa.

DeKay

Thanks @dekay for encourage me.
Up to now Im playing with PC and usb DAC hookup to my integrated as-3000 above. Things so simple with things like wasapi on windows to get bit perfect etc. That's why up to now I not posted questions. But I actually has been read hundreds of articles here and there for learning and going down the road with correct path.
 
Now I just entered vinyl analog and things became too complicated to be aware of in advanced before press buy button:) However things getting simpler gradually.
Thank you very much.