Mods for Avantgarde speakers

Maril555, you could be right, it might be a major surgery. Not familiar with the construction of the new G2 series.
Believe their main reason for putting the tweeter inside the sub cabinet is 1) aesthetics and 2) reducing overall size and make them more acceptable in a domestic environment. there are many other things you can do to improve the sound of your speakers. see my post at the beginning of this thread. happy tweaking!

Hi Duomike,

the inserting of this room correction box should be ok. It's all in the digital domain & still using my existing DAC as an interface/volume control & all clocked too. It's the best one could do. All the cabling is top notch. So the least compromised way to test the time alinement without cutting up the trios!

I will listen to the system before time alinement to make sure there are no changes in the performance. Then get into the alinement/correction.

chadeffect, you would need 4 dacs and 4 amps to time alignment all drivers. of course the 4dacs should have a delay function build in so that you can adjust each dac individually. this means big bucks, a lot of additional cables, component stands etc..
better spend a few hundred bucks and get some stands build by a carpenter.

Duomike,

My understanding is this correction device is very clever & flexible. Not only can it split the signal 8 ways & send to its various analogue or digital outs, but what is useful in this situation is it can also do all the splits for the xover internally & send that split & corrected digital information bussed to the main out. (so my system stays plugged in the same way. Only difference is a digi out into correction, then digi out from correction back into my DAC)

Im not sure exactly what happens with the microphone & room responses. I suspect you do them 1st. Then set the xover freqencies or types for each driver and it works out the rest & busses it to the main output.

Now this is probably not the best way of using it, but it is the most practical for my purpose, without the need for multiple amps etc etc.

But as they say "the proof of the pudding is in the eating". I will let you know but the guy is extremely confident it will work as I explained. I know one guy who has used it & he said it was perfect! I had that RP1 room correction device which is not as flexible, but it was very very good.

chadeffect, if this clever unit got 8 separate analog or digital out you still need 4 dacs and 4 stereo or 8 mono amps. there is NO way around it.
I have a tact rcs since '99. I'm not a fan of room correction at all. don't use it since several years. when you change the response in the digital domain the sound becomes a bit hard/ digital sounding. using dsp only in the bass to cut peaks. do not touch the response at mid and high frequencies at all. in my millennium I can switch dsp like a digital filter on and off while playing music per mouse clicks. this way you can hear in seconds the nasties produced by dsp!!
My advice to you is to get some separate stands for the mid and highs buildt!