Replacement Motor for a Vintage Thorens TD 160 Turntable


My son owns a vintage Thorens TD 160 Turntable.  The platter is slipping on start-up an on play.  My son has isolated the problem to the motor.  Any suggestions on where to source a replacement motor?? Thanks
bifwynne
My son has done enough checking to isolate the problem to the motor.  So I ask, is it possible to buy a new or rebuilt motor?  Or, are there any shops that can rebuild the motor?

If not, I surmise that the TT is scrap. 

The belt is OK. 
Try this place: 
KAB Electro Acoustics
Preserving The Sounds Of A Lifetime
www.kabusa.com
www.twitter.com/kabelectro
P.O.Box 2922
Plainfield, NJ 07062
908-754-1479 Phone
908-222-3442 Fax


It would help if your son could post the symptoms (in detail) and what he has checked so far here.

Having owned every version of the 160 except the Super "motor slipping" doesn't ring a bell.

Has he checked the larger capacitor?

To answer your OP there are motors currently available on eBay in the $250-$300 range (supposedly NOS, but no guarantee).

DeKay
Thanks guys.  

Dekay, ... large cap. uuuhm.  That could be a possibility.  If the cap jump starts the motor, that could be the culprit. My son says that the problem occurs on start up.  He told me that he has to give the platter a push to get it started. 

Let me get more detailed info and I will post it.  Replacing a spent cap is a much better ... and cheaper ... solution than replacing the motor.

Thanks

BIF    
Many motors use a cap for the extra voltage required to get going. The value is often printed right on them. Pull the cap, measure capacitance, if it is out of spec you get off cheap. This totally fits the observation. Fingers crossed!