How can one send a photo in jpg format?
Cary Audio SLA-70B amplifier
I have no schematics for my SLA-70B and Cary Audio no longer offer technical support on this very old [27 year old] amp. The LED light on the front panel of my SLA-70B Signature Amp does not work [does not light up]. Upon my opening the bottom panel I noticed that the positive side of the LED was “just hanging in the air. Also a resistor 100K 5W was totally blown up so I cannot take a reading of it at all.
[I don't know why I cannot include an illustration of the issue in question]
The negative of the LED is connected. The positive (orange wire) is just floating loose. There is a resistor 100K 5W which is connected to GRD and the other side has blown up.
I do hope someone can allow me to upload an illustration. It will definitely help in solving this issue.
Thanks, richfrank
[I don't know why I cannot include an illustration of the issue in question]
The negative of the LED is connected. The positive (orange wire) is just floating loose. There is a resistor 100K 5W which is connected to GRD and the other side has blown up.
I do hope someone can allow me to upload an illustration. It will definitely help in solving this issue.
Thanks, richfrank
- ...
- 23 posts total
What are you sending Porn? I can find all that I need somewhere else.. LOL. https://www.ukaudiomart.com/details/649399625-cary-audio-sla70b-signature-stereo-tube-power-amplifie... <<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>> Which wire is it? |
How you doing oldtimer, I mean oldhvymec. That's just the problem; I can't do a schematic; I cannot even send a photo because there is no place to upload a photo. And why I can't do a schematic? Because I don't know what goes connected to what. We have a wire just "swinging in the breeze" that is loose, one end from the positive of the LED and the other end ?? Don't know where it goes! I can see the high voltage wires B+ going into a 5-lug connector and soldered to lug #1. Lug #2 is empty. At lug #1- it has also connected to it, 2 resistors in parallel bands RED-VIOLET-YELLOW 5W each which connect at the other end to lug #5. Lug #2 is EMPTY. Lug #3 is GRD. Lug#4 is EMPTY. At lug #3 is the resistor in question: 100K 5W ..... and the other end is BLOWN UP. So what do I have? I have one leg of a resistor blown up and I have one side of the + wire of the LED in the air. IF I HAD A SCHEMATIC or a pictorial I could easily see where they are to be connected. Right now I can only guess. I am counting on your vast experience to show me. Was that you that sent a link from the UK? Let me take a peak at it and see if I can solve it. Hope to hear from you shortly. I like your commentaries. richfrank |
- 23 posts total