Ikeda 9GSS cartridge compliance

Scot, you are on the right track, the 4 Point 9 is an amazing arm. Like Mike Fremer I set the SRA to 92 degrees and forget about it. VTA towers are not worth the expense. I would go with the 9. The 4 Point 9 is in my list of top 5 tonearms. 
What are you using for a table? 

So Mijo, you would ignore the resonant frequency issue and go with a low mass tonearm regardless of cartridge compliance? That’s basically what you inferred. What happened to the sports car vs truck suspension analogy?

I forgot to mention, there is nothing wrong with step up transformers. If you have a phono stage that you like the best thing to do is install naked but shielded transformers inside the phono stage. You can add a switch to switch them in or out of the circuit. Personally I do not like switches an other controls in the cartridges signal path. I only ever keep one cartridge installed, the one I like best. So, I will go in and move two wires. Might take me 10 minutes total. I have an ARC PH3 SE which I adore. But, it only has 54 dB of gain which is not enough for many cartridges. I installed two Sowter mono phono transformers and they sound great. Doing it this way results in a quieter situation and it avoids another interconnect and two connections in the signal path. Rt now I have a high output Soundsmith cartridge so the transformers are disconnected. I would very much like to try an ultra low impedance cartridge with a current mode phono stage but I just spent all my Hi Fi money for the year.
Maybe next year:-)

@lewm , you know me well enough to know I would never do that. You have to use more compliant cartridges. Running with a high resonance frequency begs for feedback and bass tracking problems. But, I will always go for the lighter arm as long as it is very stiff and has only 2 degrees of freedom. The Schroder CB, Reed 2G and Tri-Planar are examples of arms I would buy, all 9 inch versions. If you have to add a little mass to get things just right so be it. 

jperry

Thanks for the heads up on the Ikeda 9” arm, much appreciated.

I’m a big fan of buying brand new, I’m also a big believer in having a factory warranty. When you buy an item on the internet and it’s used, you just never know what you’re going to get. That’s just what I’m comfortable with. 

Take care
Scot