Contact -enhancer, fuses - NOS 1260 High fidelity audio cables


My friend bought a  bit what seems a bit pricy, but I split the cost ,and without question this very special blend is far more powerful then I thought ,I expected a small change but just letting it play for several days a profound improvement, I took two pair of wire wire eclipse cables one treated one not , , as well as fuses 
and then removed , my brother changed them not mentioning which ones ,only 1 sets time needed for integrated amp 
a sizable increase in resolution and image depth , soundstage too was wider as well as deeper .I 
waited a couple hours in between , the fuses synergistic orange , they too were very much improved .
I am going to let them seat  in another 100 Hours at least .I still have not done the power cord, or speaker cables yet . I am very impressed. I was very much a skeptic, since I already have been using 
stabilant 22 which I thought was respectable increase in fidelity . Before making any type of opinion 
it’s well worth trying ,I was told in a week they are coming out with 1/2 size bottles for $349 which will do several audio systems, a light application goes a long way and IMO a noticeable increase in fidelity 
for minimal cost.
128x128audioman58

I tried to get these answers from High Fidelity on this product to no avail.

So if anyone can answer these questions, I would appreciate it.

1. When it is applied, do you have to let it dry before inserting it?

2. What happens if you disconnect the connector, is it scrapped off and need to be reapplied.?

3. After a period of time does it need to be removed and reapplied?

4. Does the balance unused go stale? In other words is there a shelve life?

5. Is it a paste or a liquid?

ozzy

Will see how good in a year like Walker silver that turned out to be pure crap.Good luck.
The stuff works well , I spoke with 2 guys who were doing test trials.roughly 10 months ago and still holding up  well.
you apply right a way ,just a thin coat it has a little brush ,I prefer small foam swabs , on just the male rca 40% the length. , all blades of AC ,and IEC 
and on all speaker connectors, fuses and tube pins. It’s dark so you can see when covered. ,if you remove ,a cable just reapply. It takes awhile for it to dry 
about 300 hours before it is fully settled in .
Are you sure you can use this on tube pins? Most if not all other contact enhancement products do not work on tube pins, due to extreme heat. Other than that, sound great!