Pimping your router

Reading some of these posts..  you would think the Ethernet data makes it to its destination only by luck…
Yet we know that the data all makes it intact and bit perfect thanks to various levels of hardware and software self checking and CRC. Yet somehow the 1’s and 0’s are going to sound better via some magic cables or whatnot. Yet critical data using “non-audiophile” methods launching missies, banking, etc… all continue working just fine..  
Makes you wonder why those same  1’s and 0’s all intact and verified will sound better via extraneous methods and mediums.. 
What a fun hobby..

@mikem,

the issue isn‘t the integrity of data packets nor their sequencing: it is the extraneous RFI/EMI and ground level grunge travelling alongside the data and having a nefarious impact on the re-conversion in the analogue domain. And: no, the noise rejection built into digital interfaces does not manage to reject that noise incursion fully. Hence all the rigmarole.
Enjoy the music

“Makes you wonder why those same 1’s and 0’s all intact and verified will sound better via extraneous methods and mediums..”

@mikem

It’s not so much about those 1’s and 0’s. In simple terms, it’s the reduction or elimination of ‘noise’ before the signal arrives in your DAC for analog conversion. As you know by lowering noise we get better resolution and dynamics. Your system is too good to be using a MacBook as a source to stream music. Try a decent dedicated streamer or server along with some of the suggestions outlined here and you are very likely to appreciate the bump in SQ.

Here is my digital streaming setup,
Apple router ➡️ Network Acoustics LAN Ag ➡️ ENO Ag Filter ➡️ Streamer ➡️ Network Acoustics USB III ➡️ DAC.

Everything matters and you already know that :-)

Good luck and enjoy music!

@lalitk 
Thanks for the response. That’s the typical answer I get every time yet with no real answer. If the ones and zeros are making it there in tact, then why can’t a simple filter be added in front of whatever to reduce any noise ? Why not use a balanced circuit and let CMR take care of it ? Why can’t  these 1’s and 0’s be read by something in front of the device and then put back without the noise if there is any actual noise that is detrimental ? Enjoy the music !  That’s what matters..

mikem165 posts05-11-2021 11:13am@lalitk 
Thanks for the response. That’s the typical answer I get every time yet with no real answer.

No real answer? You got a real answer multiple times by multiple members.

It sounds to me you don't like the answer. It is easy to dismiss something as "not real" if you don't like it. It also sounds to me your mind is already set in this stuff. Ultimately, the proof is the pudding, which in this case means trying for yourself. Of course, if you have any curiosity of doing so, and willing to experiment. Or you can continue to spend your time in the forums arguing about it. It won't get you anywhere