Dynaudio c1 signature

Raindog If you get the C1's get the stand 4. You mount the tubes to the speaker plinth without using the top plate. Then before you put on the bottom plate is when you fill them. I have only my rear tube filled 2/3rds with sand. Yes you do get a big long baggie to put the sand in since you can also run the speaker cable through the back tube.

As far as I know there is no new logo for the stands. I'll be contacting the North American distributor next week for something else so I'll ask the question again.

i thought maybe they have new (improved) models of stands for c1 sigs. but i guess im wrong...

Actually the Stand4 is only 3 or 4 years old. They replaced the Stand2. The difference is the Stand4 has a larger opening at the bottom to make it easier to fill with sand. When I first got my original C1's my dealer brought over the Stand2 and when I asked how to fill them he looked at me with a grin and said "grain by grain" (because the opening was tiny) and gave me his Stand4. As far as filling the tubes I highly recommend using the foam insert for the top of the speaker and setting the speaker in it upside down. Leave the grills on and use an old towel or sheet to cover the speaker because if accidentally spill some sand you don't want it to get stuck to the Esotar2 tweeter. Now if that should happen crumple up some scotch tape and get it off that way. DO NOT use electrical or duct tape because to is tooooooooo sticky and you may ruin the tweeter.

I should be getting an answer tomorrow from Dynaudio in the USA

OK I was wrong. There is a new Stand4 and they have no logo per Dynaudio. Just got a reply today.

Hi guys,

I was not ware of the new stands without the loge. That is good enough for me. (When I have demoed the C1 mk2s the dealer had the old stands and I did not like the fact that the speakers had a different logo that the stands. I told the dealer that such inconsistencies should not happen at this price point. He probably was not aware either of the new stands without a logo as the only things he said was "well...")

Raindog031, I remember reading the remark in Stereophile about the empty stands and thinking it was a very silly one (to me it sounded more like negative advertisement than a warning for the users). The reviewer should have filled the stands instead of making that remarked. Of course, an empty pipe will ring.

Best wishes,
Paul