DeoxIT on cables/Jacks?

Love the stuff.  I live in a very humid clime. I regularly spray it on my preamp's volume pot and switching knob.  Not only does the stuff quiet extraneous noise, it lends me just a little bit more clarity, imaging and life.

Dean, yes - use it to clean any contact surface. I use regularly on tube amp pins and sockets A good cleaning on the interconnects WILL make a difference in sound.  Dale

Please clarify:  

It doesn't remove oxidation from metal surfaces therefore it will not improve sonics? 

Or, removing oxidation from metal surfaces doesn't improve sonics?

- Thanks.

It is claimed to remove oxidation from metal surfaces. If it works, good! Will it improve sonics? I doubt it!

Deoxit makes a noticeable improvement in sonics. More clarity, less grain; subtle, but obvious gain in overall refinement. Do your interconnects also!

Take Qtips (not the plastic stick version) and pull the cotton off the ends so that the “stick” is bare, or with only the thinnest layer of cotton left. Dip or spray the ends with Deoxit, stick in the ground flanges of your interconnects’ male RCA connectors and twirl around inside. You’ll be amazed at their dark color afterwards.  Then do the same for the inside of the female RCA connectors on your amp. Don’t reuse. Use clean Qtips for each connection.

You will hear the difference.

@racked, Not recommended for tube sockets according to manufacturers. You don't want to leave any residue inside the socket. 
Also, when using on tube pins, wipe off all the gunk and make sure pins are dry before using.