I think you would find, or at least in my opinion, MC cartridges have advanced quite a bit more in terms of sound quality than have moving magnet or moving iron iron cartridges, since the good old days of the 1970s. I choose that era because the first MC cartridges to reach the US market did so in the early 1970s, to the best of my recollection. Specifically we received the Supex line of cartridges from Japan at about that time. In my opinion, the Supex cartridges were no match for any of the better moving magnet and moving iron cartridges of those days. That could be because there was a dearth of devices that had sufficient gain to handle the low output of the cartridges. Mark Levinson was one of the first to produce such a black box which could be used ahead of a moving magnet phono stage to add gain. I suppose there were also SUT‘s back then, but I have no memory of them. However, gurus like Harry Pearson jumped on the bandwagon right away, and his praise of the Supex was way over the top compared to what my own ears told me back then. I was not even tempted to own one. My point is that I think you would have more fun investigating vintage moving magnet and moving iron cartridges and stick with later production moving coil types, say from the 1990s onwards to the present.
Upper Level Vintage DD Strenghts and Weaknesses
All of these tables have been discussed in some form or another here over the years. I have read quite a few threads on them, but its a bit difficult to nail this point down.
Basically I am looking for a non-suspended table to install a Dynavector DV505 arm on, and these tables can fit the bill.
The most widely available is a Denon DP 75 or DP 80 in a Denon plinth, and they are perhaps the most affordable also. Are there any of their plinths that are desirable, or are they just a veneered stack of MDF or plywood?
While more expensive I can find a Sony TTS8000 in a Resinamic plinth although shipping from HK is expensive. There is one thread I came across here where a member who restores tables says two of the three TTS8000 he has done had play in the spindle assembly which looked to be wear in the brass bushings of the motor. That does make me pause in concern.
The JVC TT101 is not only difficult to find, its apparently a bit of a bear to get serviced, so its not high on the list.
The Technics SP 10 MK II I have owned, and its a nice table but to be honest I had a Denon DP75 that I felt actually sounded better. Also the models that are out there are either abused or have a premium price tag attached to them. Also I don’t need instant torque, and I think the bi-servo designs might offer better speed control.
As I write this the Denon and Sony seem to be at the top of the list, unless there is another I should be looking at.
Basically I am looking for a non-suspended table to install a Dynavector DV505 arm on, and these tables can fit the bill.
The most widely available is a Denon DP 75 or DP 80 in a Denon plinth, and they are perhaps the most affordable also. Are there any of their plinths that are desirable, or are they just a veneered stack of MDF or plywood?
While more expensive I can find a Sony TTS8000 in a Resinamic plinth although shipping from HK is expensive. There is one thread I came across here where a member who restores tables says two of the three TTS8000 he has done had play in the spindle assembly which looked to be wear in the brass bushings of the motor. That does make me pause in concern.
The JVC TT101 is not only difficult to find, its apparently a bit of a bear to get serviced, so its not high on the list.
The Technics SP 10 MK II I have owned, and its a nice table but to be honest I had a Denon DP75 that I felt actually sounded better. Also the models that are out there are either abused or have a premium price tag attached to them. Also I don’t need instant torque, and I think the bi-servo designs might offer better speed control.
As I write this the Denon and Sony seem to be at the top of the list, unless there is another I should be looking at.
- ...
- 80 posts total
- 80 posts total