Dedicated lines — how many? Other advice?

FYI, VH Audio in USA and Audio Sensibility in Canada sell cryo-treated 10awg Romex.

Environmental Potentials EP-2050
https://www.vhaudio.com/acpowerconditioning.html

Actual user since 2007.

@tvad I had that in my notes from before. On my list.

Bear in mind a lot of things people say that seem to make sense don’t really pan out when tested. The idea of separating things on different circuits for example. I have done all kinds of stuff that proves this does not work the way everyone thinks. There is even a very simple method anyone can use to demonstrate and prove this for themselves.

Simply listen to some music, flip off all the non-system circuit breakers, and listen again. The improvement you just heard was nothing to do with the system circuit. You didn’t touch that. It is all the other "separate" "isolated" circuits that made the difference. If things on other circuits are isolated or separated then disconnecting them would make no difference. But it does. Therefore they cannot be isolated.

Next do the same thing only this time flip off only circuits with nothing running on them. Another improvement, this time not as big but it is there. I have done this several times for different people, they always hear it. I have done this before and after adding a power conditioner, step down transformer, system dedicated earth ground, etc. All things that are supposed to eliminate and prevent things like this from ever happening. They do not. They do not make even the slightest difference. The breaker flipping trick makes a big improvement, no matter what.    

So what is going on? I could tell you but it is better if you actually do this and think about it, because that is the key, to think and not just repeat stuff everyone else is saying.

Been consulting some very experienced audiophiles with long scientific backgrounds. They've been testing audio for a long time and have fantastic systems.

1. The idea of designing a power supply scheme around defeating ground loops is one way to go. But many people never experience ground loops. If I run more than one line — which is quite cheap when everything is bare wall and a new panel is coming — is smarter than accepting, from the get go, that ground loops are a likely result.

2. If I ever want to have the ability to run high power class A amps? If so, having dedicated 20 amp circuits is the way to go.

3. If I live in an area where electrical storms are common? (I do). If so, then one better be thinking about surge protection and/or unplugging everything when not in use. Some do both.

4. Recommendation: at least two dedicated 20 amp lines; one is for power amps, the other is for everything else. More dedicated lines makes sense, if the cost is reasonable at time of build.

Oh, and Miller -- I agree about listening. I'll put in the additional lines and listen -- for a ground loop, for sound, etc. And if it sounds better on a single line, or if I hear a ground loop hum, I'll let everyone know. Promise.