2. speakers
  3. 1329468063

Amp recommendations for Tannoy Canterbury SE

I have just purchased the Tannoy Canterbury SE speakers and am driving them with my existing Ayon Audio Triton II KT88-based monoblocks delivering 100 Watts per channel. My only source Ayon CD-5 is connected directly to the Ayon monos, since the CD-5 has got a decent volume control. I listen to mostly very fast and dynamic music including rock, techno and others.

My initial impressions are that I am not getting speed, punch and tight bass. I am wondering if this is possibly due to an amp mismatch. While the tube amp's 100 Watts seem more than adequate for Canterburys 8 ohms and 96db spec, I wish I could get better results.

I am seeking recommendations on what could be the best suitable amp for the Tannoy Canterburies. I am open to both tubes and solid state.
- What could be some of the best Tube Amps as well as Solid State Amps that could be a good match ?
- Existing Tannoy Prestige series speaker owners - what amps do you use ?
- Should I be looking at tube amps which are based on tubes other than KT-88 ?

If you have any other recommendations in positioning/configuring the Canterburies please let me know too.

Many thanks in advance
Wilfred
wilfredt
wilfredt OP
36 posts
 
Mulveling, thanks for your tips. I will need to introduce a good preamp with the right gain as you suggested, at some point in time in the future. But that's when my own financial situation improves ;) or after I sell my Dali MS5 speakers !
wilfredt OP
36 posts
 
Cfluxa - yes, I believe Jim is quite happy with the excellent Viva 845 amps. Unfortunately the Viva amps are too expensive for me now. I need to sell my Dali MS5 speakers first !

Also, I am trying to understand the differences between 845 based amps and KT88 based amps, as I have only heard KT88s. For the kind of fast, dynamic music, I am not sure if I would be better off with the punch given by KT88s and whether 845 based amps also can provide that kind of dynamics and punch.
wilfredt OP
36 posts
 
Cfluxa, some time back I was going thru Jeff Day's blog, and it was interesting to see that Jeff was using the famous Leben CS660p Amp with the Tannoy Westminster Royal SE speakers. Just when I was drawn to this amp as it was more affordable than the Viva amp, I noticed that Jeff sold it off and is now planning to use a 300b based amp. Perhaps this is something to consider in future, but the question is whether 300b amps can drive the Canterburies and deliver speed, dynamics and punch.
charles1dad's avatar
charles1dad
10,250 posts
 
I don`t know how similar the Tannoy Westminster(easier load?) to the Canterbury model. Jeff Day says the Sophia 300b SET amp was significantly better than the Leben or any other amplifier he`s use with his Westminters. May not apply to the Canterbury however. I suspect an active gain preamp would do wonders.
Regards,
hornguys
180 posts
 
Mulveling -

Since you are in the Atlanta area, you're invited to hear my set-up.

In fact, I just sold the Vivas, so I will be using other (actually less expensive) amplification.

I think you'll like it - except for the money issue... :)
.
More to discover