This Schiit SYS will do the trick.Those two outputs on the Decware are bridged!
https://www.schiit.com/products/sys
https://www.schiit.com/products/sys
Decware ZSB please help
Hello All,
I have one of the Decware ZEN switch box that I am using in reverse. The model I have does not have the A/B switch so I can run two different sources. I reached out to decware but no reply. I know they are very backed up with orders. So I was hoping someone here could help me. I have good soldering skills but I need for someone that can tell me what switch I need to buy and maybe a hand written schematic diagram so I know what wires to solder to which wires. So if anyone could help please let me know
Thanks
Mark
I have one of the Decware ZEN switch box that I am using in reverse. The model I have does not have the A/B switch so I can run two different sources. I reached out to decware but no reply. I know they are very backed up with orders. So I was hoping someone here could help me. I have good soldering skills but I need for someone that can tell me what switch I need to buy and maybe a hand written schematic diagram so I know what wires to solder to which wires. So if anyone could help please let me know
Thanks
Mark
- ...
- 14 posts total
| Post removed |
| Post removed |
I still don't see how to get to the "4 amps" or 4 outputs without a bunch of cable splitting. Use the Schiit and Decware together and only use one input on the Decware and it's 4 outs. OR draw your own schematic and solder away on just the Decware.. A preamp would have fixed it all for the inputs and output to a single input on the Decware and use its 4 outputs. Simpler yet.. |
I just have one question about the switch. Can I use this switch? Will this one work? .....Any dpdt switch will work. However, not all toggle switches created equally, for best result, look for gold plated silver contact. https://www.mouser.com/Electromechanical/Switches/Toggle-Switches/_/N-5g2j?P=1z0z2xkZ1z0z040Z1z0z2uv |
- 14 posts total