jfd11, hmmm, you have to tell us the name or it's like it never happened.
- ...
- 79 posts total
Redwood, I bought most of mine from Surplus Sales of Nebraska, when I didn't make my own. At the Surplus Sales website, click on 'capacitors' in the left column, then on 'air gap variable', then go to the 'quad' section. There are some with 4 sections, each of which maxes at 460pf, for about 1.9nF or 0.0019 uF when paralleled. With judicious design, one can create an RIAA network with values in that range. Warning: they're big and expensive. But it's the best sound available. |
My visitor was Ken Stevens of
Convergent Audio Technology. His wife, I believe was from the WNY area. |
Redwood, it’s just a matter of getting used to them. Capacitance is an effect of two conductors separated by an insulator. The bigger the plates (conductors), the more capacitance. The closer together, the bigger the capacitance. Accordingly, the capacitors are made so that every other plate is connected together, and the shaft turns the plates so that they become close together and alternating. This increases capacitance to the maximum value, while turning past that place decreases the capacitance towards the minimum. With the help of a meter you’ll figure it out in a few minutes. Nothing exotic here, the theory’s been known for 200 years. |
- 79 posts total