Is the Manley Steelhead still relevant?


Looking for a state-of-the-art phono stage. Budget? $15K or less. After almost 20 years, is the Manley Steelhead still relevant? Or are there newer, better options?
imgoodwithtools
@rdk:

Thanks for the detailed reply.  Yes, the balanced lines make sense.  But what I was considering wasn't changing out the phono stage, but how using a pre-amplifier would be different than simply using the Manley Steelhead phono stage as a pre-amplifier.  
Drbond, Like nearly every preamplifier or phono stage ever made, the Steelhead operates in Class A.  Also, like every other preamp or phono stage, the Steelhead is not push-pull.  The terms Class A and push pull generally apply to the operation of an amplifier.

The term “preamplifier” these days can be used to refer to either a single box that contains a line stage AND a phono section or to a line stage only,  So, you are considering using the Steelhead as a phono stage and connecting its phono outputs to a line stage.  The major advantage of doing so is only that most linestages will add a bit more gain to the signal, typically 10 to 20 db.  The Steelhead’s line output does not add any gain over and above that which you dialed in at the phono settings.  The max gain is 65db.  I own only one cartridge for which that is not adequate, an Ortofon MC2000, which puts out .05mV.
Lewm,

Thanks for the reply.  

I'm using the Steelhead's line in as a pre-amplifier for my DAC, which is then sent out to the amplifiers.  So, essentially the Steelhead line in does not add any gain, but a standard pre-amplifier would add some gain to the line in?  The only advantage to gain being additional signal, which could add to distortion?  

Thanks.
For your CD player or any other device that puts out what is generally considered a high output voltage, like a tape recorder, a television set audio output, etc., the gain added by a formal line stage is completely superfluous. The output voltage of your CD player is fully adequate to drive an amplifier.
@lewm 
Thanks for the detail.  I may try running my CD player without a pre-amplifier just to find out how it sounds.  (Unfortunately there's no volume control on my CD player, so I'll see how loud or soft it is.)  

So what you're essentially saying is that a pre-amplifier may be superfluous for CD players, and are essentially only volume control devices, which may also add some "color" to the signal?