Benjamin from Mojo Audio here to clear up any misconceptions. The Mystique X is not replacing the EVO. The EVO is still a current product and fully supported.
There are no plans to stop supporting the EVO and there will be a new EVO for 2022. The Mystique X is a new lower cost model which has better performance than our EVO Basic and very close performance to our current EVO Pro.
Now you know why we’ve been offering a 20% discount on our EVOs...we knew we were going to be releasing the lower priced X.
The X stands for "extruded chassis." Switching to a 9" wide x 4" tall x 16" deep extruded aluminum chassis with custom face and rear plates is one of the many cost saving compromises we made.
Because the X is so close in performance to our current EVO models, in 2022 our EVO is being totally redesigned and upgraded. The 2022 EVO will start at about $15K and go up to about $20K. The new X will start at only $7,777. This is where the "all the magic...half the price" stuff comes from.
Among the upgrades to the 2022 EVO will be things like dual mono power supplies, custom Lundahl amorphous core power transformers, and the PCM63 DAC chip. Since the new X is quite a tough act to follow, the new EVO won’t be available until mid year 2022.
But back to more info on our new X...
The circuit and most of the component parts in the X are identical to the EVO. There are a few almost inaudible compromises in the digital power supplies and 9 vs 16 Belleson regulators total. There are also some improvements made to all the power supplies which will offset the compromises.
For those of you who are purists like me, there are improvements to the S/PDIF inputs. The X will also have a USB input cut off switch that will remove all clocking from inside the chassis to improve S/PDIF performance even more.
Among the other cost saving compromises we made was going to all PC board mounted connectors...pretty much what most manufacturers do. There are almost no wires inside the X chassis. The compromise is that we are no longer able to suspend all the circuit boards on anti-resonant mounts. But the chassis itself has some new anti-resonant treatments. So overall switching to PC board mounted connectors is a net gain in performance.
In 2022 we are also evolving our manufacture from 100% hand built to robotically assembled. This is going to both lower our cost of manufacture and significantly increase our productivity. So for the first time in over 12 years in business Mojo Audio will be selling through an international network of retail distributors.
The Mystique X is the first of our manufactured vs hand built products which will sell through retailers.
Hopefully in a few days we’ll have engineering drawings of the new X chassis and full descriptions on our website.
There are no plans to stop supporting the EVO and there will be a new EVO for 2022. The Mystique X is a new lower cost model which has better performance than our EVO Basic and very close performance to our current EVO Pro.
Now you know why we’ve been offering a 20% discount on our EVOs...we knew we were going to be releasing the lower priced X.
The X stands for "extruded chassis." Switching to a 9" wide x 4" tall x 16" deep extruded aluminum chassis with custom face and rear plates is one of the many cost saving compromises we made.
Because the X is so close in performance to our current EVO models, in 2022 our EVO is being totally redesigned and upgraded. The 2022 EVO will start at about $15K and go up to about $20K. The new X will start at only $7,777. This is where the "all the magic...half the price" stuff comes from.
Among the upgrades to the 2022 EVO will be things like dual mono power supplies, custom Lundahl amorphous core power transformers, and the PCM63 DAC chip. Since the new X is quite a tough act to follow, the new EVO won’t be available until mid year 2022.
But back to more info on our new X...
The circuit and most of the component parts in the X are identical to the EVO. There are a few almost inaudible compromises in the digital power supplies and 9 vs 16 Belleson regulators total. There are also some improvements made to all the power supplies which will offset the compromises.
For those of you who are purists like me, there are improvements to the S/PDIF inputs. The X will also have a USB input cut off switch that will remove all clocking from inside the chassis to improve S/PDIF performance even more.
Among the other cost saving compromises we made was going to all PC board mounted connectors...pretty much what most manufacturers do. There are almost no wires inside the X chassis. The compromise is that we are no longer able to suspend all the circuit boards on anti-resonant mounts. But the chassis itself has some new anti-resonant treatments. So overall switching to PC board mounted connectors is a net gain in performance.
In 2022 we are also evolving our manufacture from 100% hand built to robotically assembled. This is going to both lower our cost of manufacture and significantly increase our productivity. So for the first time in over 12 years in business Mojo Audio will be selling through an international network of retail distributors.
The Mystique X is the first of our manufactured vs hand built products which will sell through retailers.
Hopefully in a few days we’ll have engineering drawings of the new X chassis and full descriptions on our website.
