2. cables
  3. 169824-94588

Zavfino

Many nice gents in this site, highly reputable common folks audiophiles like @lalitk @wig and others have mentioned these, so it’s probably time to create a specific thread on Zavfino, a direct sales cables company based in Canada with presence ‘ distributors in US, also direct:


I took the advice of these folks with a power cord, the Prima MK2

I could not be happier with this cord, something that would easily cost $2,000 or even $3,000 from other better known cable makers. It’s outstanding, for about $500. Absolutely amazing build, and packaging too. It sounds great, very quiet. I am sure the cheaper PC, the Majestic at $390 is very good too: 
I now have the Prima speaker cables on my way. Call me “sold”.

No BS, truly top quality cables company that flies under the radar. Very affordable too. Take a look. No relation to the company, just a happy first time customer, thanks to my Audiogon friends here
128x128thyname
thyname's avatar
thyname OP
3,107 posts
 
Congratulations! Thank you for the update.
As I have previously mentioned above, the effects are cumulative. The full loom concept. If budget allows, you can add more Zavfino to your chain, gradually. You will see (hear) what I am talking about 
emilian67
9 posts
 
So, I installed the used Dart into a Audioquest Niagara 1200 that powers my 2 front JL F-113 subs.
The power cord that I was using was a DIY version that I made using 10ga .9999 solid silver wire terminated with Furutech NCF fittings.I must say, the Dart seems anemic compared to my DIY cord. That is, the bass is barely detectable.

 @ozzy5
What  10ga .9999 solid silver wire do you use ?

ozzy's avatar
ozzy
7,554 posts
 
emilian67,
The 10 gauge silver wire that I used came from a supplier that provided documentation showing its .9999 certification.
I then polished it, applied some Furutech Nano liquid, pushed the conductors through the best oversized teflon tubing I could find, installed Graphene mesh sleeving, slightly twisted the 3 conductors then installed Furutech NCF fittings on the ends.
The parts alone cost over $2000. It is an awesome looking and sounding power cable. If purchased from a company it would probably be in the upper $$$ range. Its best attribute is in the bass performance.

ozzy
grannyring's avatar
grannyring
6,554 posts
 
@ozzy, did you solder/crimp spades to the conductors to insert into the AC plugs? If so, which spades did you use? Thanks. 
kimurastanley's avatar
kimurastanley
34 posts
 
@thyname Could you provide your experience with silver dart vs prima? I finally got the fusion XLR and 1st impression is very very promising, both finishing and sound quality.

That makes me wondering what are the additional impacts silver dart can provide? 
More to discover