Cartridge alignment, WallyTractor, SmartTractor, oscilloscope and Analogmaigk.

Honestly, seriously high quality cartridge alignment can be done with a free download found on-line printed on a piece of paper. The only thing you will then be missing is the paper is thinner than a record. So you tape the paper on a record. 

I am not kidding. This is exactly what the MoFi Geo-Disk is, only the MoFi is the right thickness and includes all the sight lines and directions printed right on it. I have used mine several times on 3 different arms, three different tables, and 5 different cartridges, always resulting in beautiful imaging, which is the key benefit of quality alignment.

Unfortunately no one who has spent a thousand dollars is ever going to admit the paper is just as good. Also no audiophile worth his salt is ever going to let on that turntable setup is really not that hard. So I know this will fall on deaf ears. Especially your guru. She will give you the most withering look, I just know it. 

So since I know you will disregard this sage advice here is what I recommend, if you are up to it. Print the alignment paper and hide it away somewhere. Then when you are done fiddling and twiddling and agonizing over the scope and test records, everything at last is perfect, pull out the piece of paper.

Place it on the platter. Set the stylus down on the mark. Notice how it falls exactly where it should. Because no matter how complicated you make it, if done right it will always be just like this.

We now return you to our regularly scheduled program.

@millercarbon I do not dismiss advice... I will not use paper because we own already the 2 protractors, and my printer does not print very thin lines which I know I need, but not because I want to ignore advice :)  

At home we like to keep things simple, specially on our hobbies. What is the point to stress about something it is supposed to bring pleasure.  

Thank you for the advise on the isolation very much, to be completely frank I keep forgetting that my house in the US is built out of wood sticks and plaster. The first time I tried to hang a picture, the nail disappeared 🙄! and now that my audio rack is about 350Kg,  when I walk the subwoofer cone wants to go for a walk and leave the enclosure behind so I am hoping your suggestions help. 

I also will have put some bars between the soil and the floor for support, like lifting a car, with the hope that will help. 

@larryi  I am glad you confirmed my theory and the effective lengths.

I do not believe the dynamic SRA is that difficult to do, a decent microscope with a good camera/depth of filed, take 10 pictures and average the angles. the big trick is to have the microscope/camera plane perfectly at 90 degrees from the horizontal plane, which it is not that difficult to do either.

Where I see more of the Wally service value is in analyzing how well aligned is the stone, is this called cantilever, with the stylus(?) 

The trick to dynamic SRA is to listen. Only way.

A rack that massive, the mass itself is so much inertia it will not move very fast even if the floor does. Mine is about that massive and I have seen it. Before when it was on cones I could stomp on the floor and the rack would move fast, sometimes enough to skip. Now the whole rack on Pods will sway so slowy, it is like 1Hz, so slow that even if large amplitude (like 1-2cm) records play just fine. My Origin Live Enterprise arm has a side bias weight that dangles on fishing line. It is spooky to see the rack swaying back and forth while the side bias weight hangs straight down not swinging at all because the motion is so smooth and slow.

I think that even with a good scope it is a lot of trouble to measure SRA.  Dynamic SRA measurement is, however, only a little bit more difficult--it just requires the record to be spinning (spun by hand, any speed) when the image is captured.  The surface must be a record, not something else like a CD, so, one must take a sacrificial disk and shave off the edge bead.  Personally, I don't bother with SRA measurement--I set the arm close to parallel, then I listen when making small adjustments away from parallel.

The Wallytool service that is much more useful is zenith measurement. This is a subject that is not discussed much because few can make the measurement, even very expensive cartridges can measure poorly, and aside from small errors, there are no means to correct the manufacturing defect.  For all the effort one puts into aligning the cantilever to be pointing in the correct direction within one degree, it is a bit disheartening to know that the stylus surface cuts may be misaligned by ten degrees or more.  If I recall correctly, Wallytools has a means for correcting for errors up to three degrees, based on this analysis.

It is quite the wonder that analogue playback dounds so good with all of the technical shortcomings and compromises.