Describe ube sound vs solid state

Rleff, I like your sence of humor, got a good laugh.

Hi Phusis,
Your description mirrors mine over a 20 year period of hearing and using various amplifiers. As you acknowledge, to each their own. At CES last year I listened extensively to the Pass Labs XS stack driving Marteen Coltrame Sumpremes. Impressive in a hifi sort of way but rather flat/dull with no vibrancy, emotion or life.In contrast to my impression some listeners there thought the sound was fanstatic. Folks just hear things differently.
Charles,

I had many discussions about shows using Pass labs amps with
Desmond from Pass Labs. In most situations they make different
mistakes. When you are not aware of the properties of each
tool you never will understand how the overall sound will be
build.

You cannot make a combination with expensive tools when they
do not fitt togheter. I can explain why they don't fitt.
Because the properties togheter will create the stage,
individual focus, sound, dynamic and resolution. In most
situation the overall sound is incomplete and the sound of the
cables do not match with the sound of an amp.

I read a review of the XS-150. They did the test with a Pass
labs XP-10. For the money it is a nice pre amp. But it lacks
in details en dynamics compared to the power amp. They also
used a Oppo as a source. You must be a F. mongol to use this
with the XS-150. Why? Because it misses the full palet in
colours of the mid. freq as the best sources. You never can
get a good insight of what the amp is capable of. This kind of
amature test you see all the time. At many shows sets are
based on political choices. This has nothing to do with audio
as it should be used. This makes me very irritated!

The difference really seems to come down to distortion. Tubes make more harmonic distortion, but it tends to be of the lower orders (2nd, 3rd and 4th). These are considered musical by the human ear/brain system.

Transistors in general make less distortion, but what they make tends to be of the higher ordered harmonics (5th and up). These are considered amusical by the human ear/brain system.

The brain uses the higher ordered harmonics as loudness cues, so if they are distorted you will get two results: the sound pressure will seem louder (and IMO/IME a stereo should not sound loud even if it is) and it will sound brighter, due to the human ear's extreme sensitivity to these harmonics.

The ear/brain system translates all distortions into tonality. So it converts the distortions of tubes into things that audiophiles describe as 'warmth', 'lushness', etc.

Otherwise both amps might measure flat on the bench, but the ear has a tipping point and will often favor tonality generated by distortion over actual frequency response errors.

There are ways to design tube amps to not make so much of the lower ordered harmonics without creating more of the higher harmonics (fully differential and balanced is one way). There are also ways to design transistor amps to make less of the higher ordered harmonics, and ways to make them make more of the lower ordered harmonics (single-ended, such as some of the Nelson Pass 'First Watt' amplifiers).

Once you understand that its all about how the amps distort (and I don't mean clip or overload, rather at normal listening levels) then you are a long ways closer to understanding what the differences are between them.

One other important difference is how the two technologies overload. Tube amplifiers overload gently and resist making higher ordered harmonics until really pressed hard. Transistor amps make lots of higher ordered harmonics as soon as they are clipped- and so its usually a bad idea to overload them as the clipping is amusical and irritating.

This is why you can often get by with less power with a tube amp than with solid state. It is also why guitar players tend to prefer tube amplifiers, as they often overload the amplifier as part of their 'sound'. Some of the best-sounding transistor-based guitar amps (Sunn comes to mind) were built in such a way that they made a fair amount of lower ordered harmonics- which is why they have a certain following as they are 'richer'.

Since transistor power is considerably cheaper than tube power, to get around the clipping problem a solid state amp will have a lot more power. The clipping problem must be dealt with as music tends to have powerful transients which makes it difficult to reproduce without distortion.

I just put two Gold Lion 12AX7's (reissue) in my modest Vac Avatar and spent the weekend basking in the sound they brought to album after album, revealing new attributes and making the performance glow with life. A $70 exercise, in the direct signal path, that is not possible with SS. I had been considering a big Mc452, but I now think something would be lost regardless of how good that is. Maybe because it would just sit there with no interaction except off/on.

The only Pass I've heard at home was the Aleph0 and matching Pre. I found it boring, but could easily have been a speaker mismatch. Then they exited my price range.