2. analog
  3. 172705-139475

Tonearm effective mass

I have read about and think I have a basic understanding of matching cartridge compliance and tonearm effective mass.  I also have read a bit about how effective mass relates to moment of inertia, and how one can alter this by different combinations of counterweight/pivot point distance.  What I havent seen, and I would think would be easier, is the effect of adding extra weight, ie heavier screws, in attaching the cartridge to the headshell...would this not, as well, increase the effective mass/moment of inertia?  .help in understanding this would be appreciated...thank you

128x128jw944ts
jasonbourne52's avatar
jasonbourne52
2,863 posts
 

Adding weight lowers the resonate frequency. 

russ69's avatar
russ69
3,497 posts
 

P.S. It's not really rocket science because you basically have high compliance or low compliance cartridges. A quick call to the tonearm manufacturer will help with cartridge selection as will seeing what cartridges the factory can supply with their product.  

audiosaurusrex's avatar
audiosaurusrex
320 posts
 

@yogiboy 

trying to understand this a little better with my Acoustic Signature 12”

TA-1000 tonearm. Maybe I’m not seeing the right specs for the two cartridges I’d like to pair, Umami Red and AT-ART9xa. 

yogiboy's avatar
yogiboy
5,654 posts
 

The AT-ART 9xa shows a weight of 8.5 grams and compliance of 20x10-6 at 100hz. The Umani Red does not give a compliance spec. BTW, Japanese cartridges compliance figures are not at 10hz they are at 100hz so you will have to multiply by 1.7 to get the correct resonance frequency calculation figure. With your 12 gram tonearm and that ART, the resonance frequency is 6hz!

jasonbourne52's avatar
jasonbourne52
2,863 posts
 

6 hz is very good! Resonance frequency should be below 10 hz!

More to discover