High Fidelity Sound Speaker

Im not hearing any distortion whatsoever in either Davidlouis. Net zero distortion. 

Based on your videos, it would seem that there are only two possible answers. 

A.) You don't know what distortion sounds like.

B.) Your hearing stinks.

 

@mozartfan  Looks like you did not read my last post carefully , I am not say Whizzer cone got distortion , The main stream Speaker audio Manufactor dont use whizzer cone drivers,  

@mozartfan Looks like you did not read my last post carefully , I am not say Whizzer cone got distortion , The main stream Speaker audio Manufactor dont use whizzer cone drivers, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Got ya Yes I just took a look at a 2015 write up from a Audio magazine, based on the NYC audio show, shows your 3 way with the VIFA Nd 10 inch wood fiber cone woofer ---niceeeee-- + the TB 2145 with whizzer cut off (???why???) + he expensive Fostex horn (= I guess catering to audiophiles that demand super sizzle highs) Can't find the link this morning. IMHO even though you altered what I thought was a perfect driver, cutting the whizzer, IN SPITE of this **tweal** I think you have the best complete/total full range speaker on the market. Witha FR in the house, always and forever destroys all and every xover/low sens types. aka *The Industry* . A bit pricey,,,but compared to what you get at Wilson, Dali, Sonus Faber, Rockport,, as this is the marekt competeing with your speaker,,,,Bache Audio Speakers are a *Steal*. Caveat, from vague memory, I thought the TB2145 had some beaming??? btw YOU HAVE the 833 SET amplifier?? WOW, super wow,, thats one heck of a tube. Alexius amp. Have you seen my Dual FR, DLVX8 + DLVX6 youtube? I have no issues with dual FR. The DIYers said it can't be done and gave me the boot on THEIR DIY site,,for **Breaking THE FR Association Rules and Regulations** By NOT receiving their approval on such a design. I did not get my patent approved by the DIYer board 1st before starting my design. Anyway, all I need is a more sensitive and larger cone woofer. ,,gotta run......

Hey Greg

OK found the Stereo Times review of your speaker/2015 NYC Audio Show

 

Looking over the driver list/xover points.

Justa  few suggestions.

Running a  10 inch woofer 22 hz - 100 hz?? = waste of a  incredible wood cone Nd woofer's potential

I'd get rid of the 8 inch midbass.

Run the Vifa Nd wood fiber cone up to say,, 500 hz.

Run the TB2145 WITH ITS WHIZZER (not cut off), at Full Complete Range, no filter.

And last but NOT least, offer your customers a choice in tweeters.

Your Fostex horn retail price is $1k.. 

Q Do all your customers wanta  horn tweeter??

I prefer domes. 

Besides Davidlouis hasa pair of Nd horns witha  gorgeous wood horn for like $400 a  PAIR.. I think your Fostex is $1k EACH!!!!!

Thats my suggestions.

Vifa W10Nd woofer

TB2145

Customer chooses from various tweeters.

I know the review gave the BA speaker stunning high marks.

But with my ideas you will also end up with same results , but at a  lot lower costs factors

I think you are trying to compete with Willson, Sonus Faber Dali, Rockport. 

When truth be told, these 4 designs  have flaws when in the same room as your speakers.

 

 

Oh yeah, they sound great stand alone, 

Then place a Bache Audio on 1 channel and all other 4 designs on the other,, flaws will become apparent and quite easily obvious.

 

You put together my ideas, 3 way,, and price it correctly, no commercial speaker can  tought your Bache's.

Neither Zu nor Tekton would  come even close to your Bache. /3 ways.

AND!!!! For same price or even less.

Tektons are like 7 Zu's 9,, I know you could easily beat both prices with my 3 way design. 

Nothing could even approach your New Bache 3 ways.

 

http://v2.stereotimes.com/post/bache-audio-002ab-loudspeakers

Classical music does not need a  10 inch woofer as assist, a  8 inch will be just perfect.

Also CM does not require a   high sesn horn tweeter, a  dome at 91db sens is OK.

I listen exclusively to CM, so Bache's speaker is not going to work for my needs.

'The ideal amplifier fora   FR speaker w assist is either a  SET (Bache's 833 SET power is not necessary,)  flea watt on 95db sens FR is not recommended

95db sens FR and under, best match is athe EL34 or a bigger  SET power amp. 

Over 95dbs sens, flea watt SET  or EL34 low powered  amp is a  good match. 

 

When discussing FR speakers, amplifier match is very important.