Room Ceiling Height for 2 channel listening - is taller always better?


I am planning a custom 2 channel listening room. Current dimensions are 17’W x 23’L x 16’H with a symmetrically sloping ceiling. No windows. The room will be accommodating Paradigm Persona 9H speakers, but I’d like it to be flexible enough to be well suited for most other options (i.e. big horn speakers, tall Wilsons, etc)

Is 16 feet too tall? Is that violating a "golden rule" room ratio (I already know it is, but is that a big problem)? Bigger is generally better, but is a taller ceiling always better? Is this too much volume for a 2 channel listening room, even with large loudspeakers? I do plan on adding acoustic treatment throughout the room to handle reverb & reflections.

Other thoughts: I am planning on 2x6 studs and standard insulation+luan+5/8" drywall. I know that 3/4" plywood is considered better sounding at only 8x the cost of drywall. I know some would advocate for 2x8 or 2x10 or 2x12 studs, but that pretty much requires using expensive insulation (at least spray foam) or some fancy carbon diaphragmatic helmholtz solution that might cost as much or more as this room :) I know that structural rigidity is important to reduce resonances. I’m also not a billionaire and am trying to balance practicality with performance.

Flooring details: planning on sound deadening underlayment, carpet, and a throw rug on top. Should I do hardwood with a throw rug on top? If I do carpet, what acoustical carpet underlayment is recommended?

128x128exsedol88

A friend of mine is in the custom install business and I have helped him with setting up audio systems in various rooms.  The most problematic rooms were those with extremely tall ceilings and rooms with large open spaces.  It is hard to get decent bass in high ceiling rooms and the sound becomes thin and lacking in weight.  In his own listening room, this friend went through the trouble of installing a structure to lower his 16' ceiling.  I would look to something in the 8'-11' range of height.  

It still boils down to treating that room for that issue. There is no getting away from the 8, 9, or 10 foot problems unless you're a horn guy (which kind of helps) and room treatment. Above 12 feet, lower the ceiling. Open floor plans get some roller panels and or heavy floor to ceiling acoustic theater curtains. You can open or close to dampen more or less.

Regards

16 and 17 are very nearly "square". Map it out, you will find the 16 ft modes are right beside the 17 ft modes. Sloping ceiling will distribute those, but focus higher frequencies. Everything you do has a different effect at different frequencies. 

One benefit of the high ceiling, the extra space can be used to hide as many and as large bass traps as you like. Mike did something like this in his room, only with side walls and cabinets that are angled to disguise the traps built in behind.

If I was doing mine again I would go hardwood, because rugs can be more easily moved around and changed. Carpeting wears and then one day you are looking at removing the whole system to replace the carpet.

 

Agree with Millercarbon. Hardwood is not only on my floors but also on my ceiling. Vinyl wrapped walls and insulated drywall. 

I built a new house with a custom room.  I used online calculator as a guide and did 18 wide 26 long 11 height. I talked to an acoustic company and they recommended 13’ ceiling or higher which I could not make work with the house design. I tapered the ceiling and 1 wall 6” to avoid parallel walls.  All corners are 2’ 45 degrees. The goal was to avoid standing waves and it did, the bass response is very even throughout the room. But lots of reverb/echo.  A hand slap takes almost a full second to die down.  My next project is proper treatments to tame the reverb without over damping.  To answer your question - yes go taller but you may want to talk to an acoustic expert before you hang the drywall. I wish I would have as it would of saved time and money and avoid another construction project.