Room Ceiling Height for 2 channel listening - is taller always better?


I am planning a custom 2 channel listening room. Current dimensions are 17’W x 23’L x 16’H with a symmetrically sloping ceiling. No windows. The room will be accommodating Paradigm Persona 9H speakers, but I’d like it to be flexible enough to be well suited for most other options (i.e. big horn speakers, tall Wilsons, etc)

Is 16 feet too tall? Is that violating a "golden rule" room ratio (I already know it is, but is that a big problem)? Bigger is generally better, but is a taller ceiling always better? Is this too much volume for a 2 channel listening room, even with large loudspeakers? I do plan on adding acoustic treatment throughout the room to handle reverb & reflections.

Other thoughts: I am planning on 2x6 studs and standard insulation+luan+5/8" drywall. I know that 3/4" plywood is considered better sounding at only 8x the cost of drywall. I know some would advocate for 2x8 or 2x10 or 2x12 studs, but that pretty much requires using expensive insulation (at least spray foam) or some fancy carbon diaphragmatic helmholtz solution that might cost as much or more as this room :) I know that structural rigidity is important to reduce resonances. I’m also not a billionaire and am trying to balance practicality with performance.

Flooring details: planning on sound deadening underlayment, carpet, and a throw rug on top. Should I do hardwood with a throw rug on top? If I do carpet, what acoustical carpet underlayment is recommended?

128x128exsedol88

@exsedol88 

I am currently building a room in my basement. My room is smaller,15x161/2x71//2 when finished. I had the room designed by an acoustician. I am using safe and sound rock wool for the insulation and 2 inch rigid fiberglass panels inside the room. There is NO drywall inside the room. I’m told I will need zero extra panels inside the room. The room walls are partially concrete and partially out in the open. The open areas are 2x6 with a sandwich of drywall and mass loaded vinyl on the outside. I also used liquid nails  when building the walls to add to the rigidity. I agree with consulting a professional. Good luck!

Some interesting thoughts and approaches but I’m not sure folks are trying to solve or prevent the same problem. Not sure about the OP but I don’t care a bit about reducing the ability of the sound from bothering neighbors or my own family—I don’t want a soundproof listening chamber. What I do want is a room that will allow my system to perform optimally with minimal to no use of additional treatments. If those with experience can chime in with thoughts on room dimensions with vaulted ceilings and construction tips and materials I should consider employing that would be great.

@oldhvymec 

its basically a heavy rubber mat that goes between the drywall layers to help with soundproofing. It’s about 1/8 inch thick.