SET Shootout China VS The USA

Each of these changes can make a dramatic influence on sound! ~~~~~~~~~~

 

I  know some audiophiles are not won over on swaping parts. = A cap is a cap is a cap...

I am a believer.

I prefer Takman Rey metal vs any and all carbon **smoothhhh* resistors. Caps, Mundorf SESGO or Silvergold EVO, whatever I can afford.

Tubes also make a gain, Teles in the pre, and have yet to roll these stock Psvane. My tech thinks there is not much to gain swaping out power tubes...we will see, that experiement waits til mid summer.

I also think, using two fullrange drivers in parallel and tweeter (without properly designed filter) works against basic idea of fullrange (a point source of sound.) It makes sound congested and messy and destroys soundstage and focus ~~~~~~~~~~~~~~~~~~~~ This is exactly the same argument raised by ~~THe Association of Full Range Speakers** aka THE Club of FR Enthusiasts,,over atn the DIY forum, Full range section,.,, **We tried this dual thingy,, did not work, wont work,,dont even consider attempting such a scheme..** WEll I broke THEIR rules and disobeyed THEIR authority,,,**I did it my wayyy** as old Frankie Sings They asked to see measurements, graphs, testing lab results etc. I had none. gave me the boot PERMANTLY banned. hahahaha Did not learn EVEN one thing from those **scientists** haha I like to break the rules, or lets say go against common opinions/beliefs. As I posted elsewhere,,this Dual thing will only work under with certain drivers. You nor anyone else in the world might say **and you actually like THAT sound???** Yep , dont touch my Dual system, I love it. 2nd tweeter arriving next wek, Dual FR + Dual T's. If all the big guns can get away with multiple driver systems,, I figure why not I.

@mozartfan It would be really cool if you could attend an audio show or maybe there is a great dealer near you. You really owe it to yourself to hear the differences between all of the topographies so that you can find out where you really are.

 

I remember vividly many, many moons ago when a very helpful dealer played a series of amplifiers for me, several tube and several solid state, in descending order of price. He played them through a very popular speaker at the time. My conclusion then: I couldn't hear much (if any) difference. He agreed. That made me feel great.

 

Then, he repeated the same exercise with a pair of exceptional speakers...everything else the same. Same descending order of price, etc, etc. The sonic differences between the amps was striking, astonishing actually. The dealer knew what he was doing. He was a WWII era radio operator, had started a radio repair shop post WWII and evolved it into a fine hifi shop which made it into a third generation. His moral to the story was to pick the speaker you like and then if you can't tell the differences between the amplifiers, relax and buy the least expensive amplifier whose sound met your goals.  His BIG advice though was just because you can't hear the difference doesn't mean there isn't a difference, it just means your speakers aren't up to the task.  He added that if I ever intended to upgrade the speakers then always buy the best electronics that you can afford at the time to ensure the speaker upgrade down the road would have the chance to pay dividends.

 

No offense intended @mozartfan but if you can't hear the differences of all of the vast array of amplification varietals that you have implied you have experienced first hand, then it isn't the amplifiers, its more than likely your speakers aren't up to the task of revealing the differences. You should be celebrating though! If you like your speakers and all of the amps sound similar to your ears and you are happy with the sound then pat yourself on the back!!! You found happiness and can achieve it for an exceptional value. @atmasphere is an amazing resource, he is an absolute expert when he is talking about amplifier design (not just OTL's but generally all topologies). He would be the first to tell you if you are happy with the sound, then stop. He would also tell you that amplifiers sound different and if you don't hear the differences then its probably the transducers.  

 

I recognize, however, that you may be more likely than not going to argue with me and say that it can't possibly be your speakers...in that case, enjoy the solo wrestling match. Warm regards and happy holidays.

Now I agree dual FR makes no sense whatsoever, Its a  completely ridiculous idea,,a  single is really all you need. Duals can make confusion in the sound waves,, 2 VC's bouncing off each other all muddy, convoluted, distorted, just a  blob of ,,poop..

But for some reason I like the sound of this poop system. 

..

The opinion in this video reflects my own subjective reaction to the 2A3.

KT type tube  offers wonderful colors, imagery, low distortion, no coloration, no fatigue.

I know this fora  fact hearing the DEfy7.

But if It came down to chosing one or the other,,I'd have to chose the 2A3 as my premier system. 

Bass are near equal, highs a tad superior in the 2A3, buts its in the midrange where the 2A3 opens up recordings that a  KT series tube just does not make happen.

 

2A3 beats out the KT series tube, EL34,88,120, 150

If you feel offrended by any of the comments in my video, just disregard and move on.

Its only my opinion and 2$'s ,,,which ...will get you a  only just a   Starbucks $2 cofee.

 

And no I ain't budging on my opinion.

 

 

 

KT type tube offers wonderful colors, imagery, low distortion, no coloration, no fatigue.

I know this fora fact hearing the DEfy7.

Jadis Is not the only one to make amps based on the KT88. You might want to hear a Harmon Kardon Citation 2 prior to saying you know how a KT88 sounds. Keep in mind this comes from a manufacturer that has only made triode power amps (and now also a class D amp...).

Regarding your speakers, what you are experiencing is that there is some destructive cancellation that is happening in your system because of the spacing of the drivers. This is actually helping prevent some of the more painful comb filtering that can otherwise occur when two such drivers are placed side by side. I’ve heard speakers set up this way. They are not bad, but seriously are not the last word in resolution by any means. They are attractive IME because all you have to do is get them in a box, wire them up and sound comes out. But if you want to hear proper imaging out of them, your head needs to be in a vise so as to be held always in the right position...

The box in the image above this post looks as if its ported. Did you do anything to prevent slap echos inside the box?