Keeping the Yamaha (SACD and CD), selling the Integra (CD Only)
Better CD Sound: The Search
Went Big into Vinyl last 2 years, then re-discovered my many CD’s, mixing it up plenty now.
I continue to try and find a CD Player with better sound than my existing cheapo Sony Changer that surprisingly keeps on keeping on.
I am hoping recent upgrades to the system will more readily reveal differences:
99.9999 copper speaker wires and interconnects, locking rca connectors, mx110z tube tuner/preamp overhaul by Audio Classics; cayin a88t bias by VAS; 16 ohm L-Pads replacing 8 ohm pots; and finally a I bought a sound meter to balance/refine the speaker’s L-Pads (it ain’t easy) for the best sound ever.
.....................................
CD Quest So Far:
I want dual processors, go used to keep cost down, even consider older vintage.
1. my Onkyo Grand Integra (DX-7500 I think), fixed the damn drawer opening problem several times.
2. This cheapo Sony Changer given to me, eh, use if for parties, why not.
surprisingly sounded as good as the Onkyo to me and friends, gave the annoying Onkyo away.
3. tried used Oppo 83 Video Player for it’s audio
Laser was weak, ’no disc’, found it is a common problem with heavily used lasers. Back it went
4. lightly used Oppo 105. Everything worked, but didn’t sound better than the Sony. Oppo is big, single, expensive, not sellers fault, so I sold it myself rather than return it, lost $205. on that attempt.
5. ’new original stock’ KLH (made by?). played a few discs, then the discs started mis-tracking on discs I know are ok.
found small black bits clinging to the surface in the area of the problems (cds play from the inside out, just guess how far out). Turned out, the belt(s) were dried out, thus when put into motion after years of storage (where?), they shed bits of rubber. Back it went, full refund including return shipping. never compared it to the Sony’s sound
6. Resolved: if vintage, make sure belts are available, get a low price, open it up when it arrives, watch it move ... use, replace belts, return as last choice.
7. Just Bought Two, in transit, One Single; One 6 Disc Changer. (both with oem remotes and power cords, most for sale are missing).
a. Denon DVD-2910 Single Player (big dent on the top. $52. del’d, eBay) (crutchfield keeps old info on their site)
https://www.crutchfield.com/S-6TIPMQKBMUZ/p_033DV2910B/Denon-DVD-2910-Black.html
b. Onkyo Integra CDC-3.4 six disc changer (open box/demo) ($51. delivered) (bserplus.com)
https://www.crutchfield.com/p_164CDC34/Integra-CDC-3-4.html
c. a bag of belts. because I will be keeping something, and I have other old stuff with belts
https://www.ebay.com/itm/334135204014
d. spare rare OEM remote for Integra 3.4, eBay
Keeping My Ears Crossed!
I continue to try and find a CD Player with better sound than my existing cheapo Sony Changer that surprisingly keeps on keeping on.
I am hoping recent upgrades to the system will more readily reveal differences:
99.9999 copper speaker wires and interconnects, locking rca connectors, mx110z tube tuner/preamp overhaul by Audio Classics; cayin a88t bias by VAS; 16 ohm L-Pads replacing 8 ohm pots; and finally a I bought a sound meter to balance/refine the speaker’s L-Pads (it ain’t easy) for the best sound ever.
.....................................
CD Quest So Far:
I want dual processors, go used to keep cost down, even consider older vintage.
1. my Onkyo Grand Integra (DX-7500 I think), fixed the damn drawer opening problem several times.
2. This cheapo Sony Changer given to me, eh, use if for parties, why not.
surprisingly sounded as good as the Onkyo to me and friends, gave the annoying Onkyo away.
3. tried used Oppo 83 Video Player for it’s audio
Laser was weak, ’no disc’, found it is a common problem with heavily used lasers. Back it went
4. lightly used Oppo 105. Everything worked, but didn’t sound better than the Sony. Oppo is big, single, expensive, not sellers fault, so I sold it myself rather than return it, lost $205. on that attempt.
5. ’new original stock’ KLH (made by?). played a few discs, then the discs started mis-tracking on discs I know are ok.
found small black bits clinging to the surface in the area of the problems (cds play from the inside out, just guess how far out). Turned out, the belt(s) were dried out, thus when put into motion after years of storage (where?), they shed bits of rubber. Back it went, full refund including return shipping. never compared it to the Sony’s sound
6. Resolved: if vintage, make sure belts are available, get a low price, open it up when it arrives, watch it move ... use, replace belts, return as last choice.
7. Just Bought Two, in transit, One Single; One 6 Disc Changer. (both with oem remotes and power cords, most for sale are missing).
a. Denon DVD-2910 Single Player (big dent on the top. $52. del’d, eBay) (crutchfield keeps old info on their site)
https://www.crutchfield.com/S-6TIPMQKBMUZ/p_033DV2910B/Denon-DVD-2910-Black.html
b. Onkyo Integra CDC-3.4 six disc changer (open box/demo) ($51. delivered) (bserplus.com)
https://www.crutchfield.com/p_164CDC34/Integra-CDC-3-4.html
c. a bag of belts. because I will be keeping something, and I have other old stuff with belts
https://www.ebay.com/itm/334135204014
d. spare rare OEM remote for Integra 3.4, eBay
Keeping My Ears Crossed!
- ...
- 169 posts total
I’m following this thread closely. I’m not into streaming as of yet and have close to 2k CD’s. So far the best sounding setup I have push’s aside the Oppo and a few other players for an older Sony CDP-2700 feeding into a Denafrips Pontus ll dac. The Sony was for industrial use and still works great, but it never came with a remote. So my old bones are looking for something that sounds as good or better and has a remote. JD
|
I found/think, after the DAC(s) it really is the combo of an OEM's bag-o-tricks (over ... up.... re-..., anti... ) you 'prefer', why I finally found something I prefer to prior Sony which I preferred over many. Still thinking about SACD DSD out the RCA jacks without conversion to PCM. I have been reading about some older SACD players. It's the aging of the lasers, belts, motors, dried lube that concerns me, but some tempting finds: ................................ Sony SCD-XA5400ES, 2009 SACD DSD out the RCA jacks, no conversion to PCM. Upscales CDs 8x to SACD numbers, then out same as SACD. ........................ Sony SCD-XA777ES, 2001, 6 audiio dacs, 3 left channel, 3 right channel. 2 lasers: 1 sacd, 1 cd. some lasers were 'fixed' the disk traversed while spinning. https://www.stereophile.com/hirezplayers/491/index.html note: XA... is front loader, the top loader was SCD-777ES, 55lb beast 2 fixed lasers, 6 audio dacs, 5 selectable 'filter' sounds. .................... SCD-XA1200ES, 2009, 8 DACs ............. Pioneer Elite DV79AVi, 2007, 3 audio dacs, I want to learn more about it |
Luxman D-03X Digital Player uses: Dual Monaural D-to-A convertersLUXMAN engineers selected a pair of Texas Instruments 32-bit PCM1795 digital-to-analog converters to process digital signals with remarkable precision. Separating left and right channel conversion helps reveal the subtlest micro-dynamics. http://luxman.com/product/detail.php?id=36
McIntosh MCD85 SACD/CD/STream Conversion of the digital data stored on the discs or in the digital music stream into an analog signal for playback is performed by a quad balanced, 8-channel, 32-bit/192kHz Digital-to-Analog Converter (DAC). Four DAC channels are dedicated to the left audio channel, and four to the right audio channel to ensure truly exceptional stereo sound reproduction.
|
- 169 posts total