component grounding

Somebody once stepped on one of my power cables and killed a couple of tweeters! He didn't mean to do it, I won't name him.

Maybe a better question to ask instead of what's the harm if nobody has been killed or harmed yet due to the ungrounded gear in their possession...would be why not take the high road ( ground..pun) and ground all gear? Thereby eliminating the one in a million possibility of death..particularly IF you happen to be the one! 

Think kids, not grown up kids. There is a safety issue for sure. Kids, water, animals, electricity, NONE of that works out. 

No smiles, or grins or LOL. I'm a good Dad no shortcuts.

Well maybe a few for the grown up kids. I just want to add PLEASE video your silly A$$ when your getting boiled. To even think people don't die every year by the THOUSANDS, is just nuts. They do. It's only 100-120 VAC right? Wake up. Number one killer is 110-120 vac.

Two times I've seen ditch work with electrical accidents. 120vac. I saw 100s of safety films through the years. And knew one that survived after putting a pickaxe through a PG&E conduit. He blew up and lived.

The neighbor down the street decided to dig out his basement. I see this MESS going on in his front yard (no permits). Two weeks later the city catches on and guess what? The house is gutted by a fire. The idiot had an arcing extension cord in the crawl along with a gas leak. ALL no permits..

They took him to jail. 60 days in the slammer he's out on bail cleaning the million dollar mess. Like I'd let him near the property again if I was a neighbor.. Total NUT!

I'll never forget him saying "This is the prettiest street in town". Sure isn't any more.

Regards

Forty plus years ago I don’t recall any consumer electronic equipment that used an EGC, (Equipment Grounding Conductor). Late 1970s and earlier consumer electronics came with a two wire non polarized plug. (Though the home you were living in may have had polarized 3 prong grounding type wall outlets).

Go back to the late 1950s and earlier the wall outlet found in our homes was just a 2 wire non polarized wall outlet. NO EGC back then...

Back in those days for a person to receive and electrical shock from a piece of equipment with a hot chassis when touching the HOT chassis of the equipment you had to come into contact with a grounded object with another part of your body. What were the odds? What was close enough for some other part of your body to come into contact with a grounded object? Now if you were standing on a basement concrete floor in you bare feet you would definitely know the chassis was hot!. Or if you had a radio in the kitchen next to a sink and you were washing dishes and reached over and touched a metal screw reaching for the volume control on the radio, and the chassis was hot, you would find out instantly the chassis was hot. Would it kill you, probably not, but you might receive a wake up notice...

Radios and TVs built in the 1950s didn’t need an internal fault to make the metal chassis of the equipment HOT. There was a 50/50 chance of it being hot. It was the way it was wired. One AC mains conductor was connected to the chassis...

https://robrobinette.com/Widowmakers.htm

Back then Radios and TVs metal chassis were enclosed in a non conductive enclosure, case, made of plastic or wood. Knobs were made of plastic or wood. Mounting screws were still made from steel or brass. So the screws could be hot.

.

Returning back to the 1960s and especially the 1970s where separate pieces of equipment were being made. Like tuners, tape players, and such. They were connected to an amp or receiver using wire interconnects. The power cords were 2 wire with a 2 prong non polarize plug. You still had a 50/50 chance of plugging the piece(s) of equipment into the wall outlet so all the equipment AC plug polarity orientation would be the same. Good thing the equipment did not have one of the AC mains conductors connected directly to the chassis.

Sill no EGC to contend with. And the equipment was fed from the same wall outlet, same circuit. Things were still pretty electrically safe in the 1970s. Even with all the metal cases and metal face plates. A person still might want to avoid standing in you bare feet on a basement concrete floor. And of course never use an AC powered radio near a bath tub. That could prove fatal... No GFCI protection in the 1970s.

.

And then some ya-hoo decided audio equipment needed to be grounded. (Though not the Japanese. The first 2 wire cord with a polarized plug on audio equipment I seen was made in Japan.)

So when audio equipment started being built having a 3 wire grounded plug is when things got interesting. And of course back then there were not IEC inlet connectors on equipment. Cords were captive, solidly, connected to the equipment.

Well for those of you that can remember the dam plug wouldn’t plug into the 2 wire wall outlet... That’s why the 3 wire to two wire adapter was in invented. Not to cheat the ground. Hey everything still worked the same. None of the audio equipment was grounded.

Problem?

It’s the mix of manufactured grounded equipment, where the 3 wire grounding plug is plugged into the wall outlet, and a piece of manufactured grounded equipment that has the EGC lifted from the wall outlet, that can be a problem. In the event the piece of equipment, with the lifted EGC, has a HOT to chassis fault. You no longer have an arms length safety factor.

.

I recently bought a Zero Zone tube preamplifier.....It has a three prong plug but the ground terminal is not connected. How can they sell this in the USA (Especially Illinois) where in many states,  everything with a plug needs UL approval.Can an ungrounded piece of equipment still get UL approval?

UL isn't required in US. Its a good idea.