Does anybody have a source for a white version of this cable? I will have to run it along my baseboard and the wife won’t go for blue or orange. Also does anybody know if the connectors could be taken off so I could sleeve then reinstall the connectors?
Cheapest way to enhance SQ with digital streaming
- ...
- 126 posts total
Post removed |
OK, my report. I bought the two optical gizmos and a relatively short piece of optical cable to connect the two. Running some supra from my mesh node into the first optical gizmo and then a 1.5 meter AQ vodka out of the second and into my aurender A10 yielded to me on my initial 30 minute session no difference.
Replacing the supra with the vodka straight out of the node into the aurender yielded more detail and ease, it was a worthwhile upgrade. But, "cleaning" the digital signal out of my node by "filtering" the signal through the optical devices hasn't made a noticeable difference. I'll keep it in the system for a while and do some A-Bs but this far its just more clutter. |
@car123 Try lps on second fmc, this should be worthwhile improvement. Don't need to spend a lot of money on this, Teradak or something similar fine.Not surprised didn't hear much difference with fmc in front of server. Adding switch and fmc after Aurrender would make more difference. But then this requires adding usb renderer. If one wants to both reduce clutter and optimize sound quality, two ways to go. FMC after server, this requires two computer setup, aka separate server and streamer, both optical enabled. The second is one computer setup, optimized usb out of server. With optimized usb out of server, add on filters shouldn't be needed. This assuming one using usb dac. |
- 126 posts total