This 60 Hz hum is driving me crazy

I just got a new to me, Prima Luna Prologue Premium Integrated tube amp. Sounds great, but there is a "ear to the speaker" 60 Hz hum. Hum sounds the same if I adjust volume +-/  The only thing I have connected is a Parasound Zdac.  Speakers are Rega RS1 Here is what I have tried:

1. I disconnected the Zdac so it was just the PL connected to the speakers with no other inputs. Hum still there.

2. While Zdac still disconnected, I use a 3-to-2 prong adpater to determine if its a ground loop.  Still there.

3. The outlet is a new one added from our remodel.  So I used an extension cord and plugged into an original outlet to see if the electricity was "dirty."  Hum was still there. 

Now here some possible culprits.  

* The stereo is perhaps set up in the smallest man cave in California.  The speakers are about 2 feet away from preamp.  I will try moving speakers further. 

* I am using crappy Amazon 12 AWG cables.  I have some better ones coming from Morrow Cables. 

* The stereo is in front of the panel that our internet wiring comes in through (I am in a condo complex).  There is no wireless there, but perhaps I should set up system somewhere else to try.

* I am using the tubes from the previous owner...do I just buy a set of new tubes?  

Is there anything else I should try?  Thanks in advance.