I bought a new P8 when they were first released by Rega. I have thoroughly enjoyed it, using a Hana SL cartridge. Both belts are to be used per Quick Setup manual, page 3.
rega P8 Ania pro setup questions
I just got a P8 and Ania pro. Very vague instructions from. Rega. comes with 2 belts and the motor spindle has a place to put 2 belts on so I assume you use both belts but they only say belt and not belts and it looks like 2 in the picture but not sure. I'm assuming you use both?
Setting the VTF for the cart. I set the counterweight as suggested in the manual and even double checked the tracking force with a digital scale. It mistracks badly at 2.0 grams and seems to track Ok but even heard a mis track there too. Any ideas? The instruction manual hardly has any info and the website not to much either.
Setting the VTF for the cart. I set the counterweight as suggested in the manual and even double checked the tracking force with a digital scale. It mistracks badly at 2.0 grams and seems to track Ok but even heard a mis track there too. Any ideas? The instruction manual hardly has any info and the website not to much either.
- ...
- 10 posts total
@valinar Good catch, I overlooked that when I was replying above and it's concerning a Rega dealer in this thread said only one. |
I bought a new P8 when they were first released by Rega. I have thoroughly enjoyed it, using a Hana SL cartridge
Did you have to do anything special in regards to the VTA with the Hana cart vs the Rega cart? I have a Hana ML here in the box and wonder how it compares to the Ania pro. You just have to set overhang and VTF? |
- 10 posts total