Adrian I also just looked your system up it's fantastic and those Altec's look amazing! Is that natural wood veneer or was it treated somehow? And please post some pics of your new room treatments.
I treated my room !
So I finally did it. I’ll share what most here know already. There may be some on the fence. I admit I didn’t do a ton of research. I still can’t interpret REQ as well as I’d like. I bought 72 of the Auralex 12”x12” panels and glued 8 of them on eight plywood panels so I ended up with eight 2’x4’ panels. I hung these at the reflection points and on the back wall. I also added 20 auralex bass traps with 3 corners done and a row across the front ceiling. Good grief I could probably sell my subs now. I have a horn system and the mids tamed down. I used to be able to run my preamp at 35%, and can run it at 50% now with no perceived distortion. I probably spent 1200 bucks. I’m not advertising for Auralex because I’m sure there are many great brands, and many better than what I got but I wish I would have done this 8 years ago when I started building my system. I run an SVS pb16 ultra and a GSG devastator with a 21” driver and I had to turn the SVS to negative 20, and the Behringer 3000dsp that runs the GSG down to 50% and it’s probably still more bass than I need. If your on the fence about room treatment, go for it !!
- ...
- 28 posts total
| Post removed |
Over the last year I implemented laminar flow devices I have built and placed in strategic front locations of my 27/21/9 ft room . I also have for years now 3 Natural wool panels on the front wall 1 each at the side reflection points. The laminar devices are inexpensive to make and are the biggest acoustic improvement I have made over the last 49 years. They are a wow factor. As small as they are they comb bass frequencies making my dueling 12s enhance the mid frequencies The vocal clarity now coming out of the rear mounted ports is nearly as clear as what comes out of the front mounted drivers. They clarify the instrument location all along the watchtower. The sound stage is panoramic even more so when the active device is engaged. Pretty damn good.Tom |
| Post removed |
@steakster the coffee table is a subwoofer. It’s the GSG devastator. It was set up nearfield because I had lousy bass. Well no more lol. And to be honest it’s my wife’s laundry folding table so it’s usually covered in clothes minimizing reflections 😂 @jond the composit veneer was put on last year by a cabinet maker. It’s called Osage orange and it came from Italy. It’s a bit over the top but I wanted it, so here we are. It did take a little time living with it tbh
im wanting to post pics but apparently I don’t know what I’m doing |
- 28 posts total