The following is a copy and paste of a section of an earlier post I had made.
There is an update on this investigation further on in this post. post that follows
________________________________________________________________
' The motivation to create this demonstration of New Wire Designs on the Tonearms is solely created from my side, the Tonearm Designers are aware of the compromises that my suggestion to trial the wires can create, when an external mounted wire is used, they remain open minded about the demonstrations and are quite willing to experience my proposals and have already shared between each other a simple solution for mounting routing the Wires and a temporary shielding method, that if all the methods being selected work together, will alleviate the concerns for an unsuccessful demonstration completely.
From a selfish perspective I am hoping for a PC Triple C or D.U.C.C Tonearm Internal Wiring, as the over the past year the whole of the system has progressively had New Wire Design Cables added, and is now set up with the same wire types being used at all other interfaces between devices, and PC's are the ongoing Cables being exchanged to the New Wire Types.
_______________________________________________________________
Today I have taken part in a phone conversation with the engineer who is producing the Tonearm that I am using.
Our models in use at present are not identical, as I have not had the modified SME Bayonet Headshell, that has a much improved coupling to the wand produced for mine.
I have heard my model in comparison to the SME Bayonet Headshell modified model, and have also had my preferred Cart' mounted onto the modified model.
There is a noticeable improvement with the modified Headshell in use, my own Cart' was being perceived for being able to offer an improvement in the preciseness of the details produced, and this is a cart' that is already very good at digging detail out. A longer listening period may have shown more of the improved capabilities of the modification.
This is a modification that I intend on having adding to my own arm.
I have balked at booking the Arm in fro the mod' as there has been inroads made to the use of PC Triple C wire for internal wiring for the Tonearm.
I have had a very recent experience of this wire in use on the modified tonearm, which had got my attention further, even though I was assured there were a few foibles that were remaining to be overcome, as the sheath was not supple enough.
Today I was informed of a new sheath being used and the Tonearm is wired internally with PC Triple C Wire.
I was thanked for encouraging this line of investigation and was requested to visit to receive a demonstration.
The Engineer who has worked with this tonearm design for quite a few years has made it known they are extremely impressed and I should hear it in use myself.
He said he has no doubts in his mind why SAEC have chosen this wire type for their Tonearm.
I has taken a little bit of obsessional encouragement to get to this stage and the reports offered are very exciting.
I have another friend who is a producer of Tonearms and has been encouraged by myself to take part in these investigations, I am sure now the reports are as received they will adopt the methods used for the one that is now in use and looking to be quite a special item.
